Categories
Motorcycles Touring Yamaha

2000 Yamaha Royal Star Tour Classic Maintenance Schedule and Service Intervals

Maintenance schedule and service intervals for the 2000 Yamaha Royal Star Tour Classic

This is the maintenance schedule and associated service intervals for the 2000 Yamaha Royal Star Tour Classic.

2000 Yamaha Royal Star Tour Classic Maintenance Schedule

Below is the maintenance schedule for the 2000 Yamaha Royal Star Tour Classic

The maintenance for the 2000 Yamaha Royal Star Tour Classic is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

No.ItemRoutine 600 mi (1,000 km) or 1 month
4,000 mi (7,000 km) or 6 months

8,000 mi (13,000 km) or 12 months
12,000 mi (19,000 km) or 18 months
16,000 mi (25,000 km) or 24 months
20,000 mi (31,000 km) or 30 months
1*Valve clearance• Check and adjust valve clearance when engine is cold.Every 28,000 mi (43,000 km).
2Spark plug• Check condition.
• Adjust gap and clean.
• Replace every 8,000 mi (13,000km) or 12 months and thereafter every 8,000 mi (13,000 km) or 12 months.
ReplaceReplace
3*Crankcase ventilation system• Check ventilation hose for cracks or damage.
• Replace if necessary.
4*Fuel line• Check fuel hose for cracks or damage.
• Replace if necessary.
5*Fuel filter• Replace initial 20,000 mi (31,000 km)
or 30 months and thereafter every
20,000 mi (31,000 km) or 30 months.
Replace
6*Exhaust system• Check for leakage.
• Retighten if necessary.
• Replace gasket(s) if necessary.
7*Carburetor synchronization• Adjust synchronization of carburetors.
8*Idle speed• Check and adjust engine idle speed.
• Adjust cable free play.
9*Evaporative emission control system (For California only)• Check control system for damage.
• Replace if necessary.

* Since these items require special tools, data and technical skills, they should be serviced by a Yamaha dealer.

General Maintenance and Lubrication Chart

No.ItemRoutineType 600 mi (1,000 km) or 1 month
4,000 mi (7,000 km) or 6 months

8,000 mi (13,000 km) or 12 months
12,000 mi (19,000 km) or 18 months
16,000 mi (25,000 km) or 24 months
20,000 mi (31,000 km) or 30 months
1Engine oil• ReplaceSee page 8-1.
2*Oil filter• Replace.
3*Air filter (See NOTE on page 6-6.)• Clean with compressed air.
• Replace if necessary.
4*Cooling system• Check hoses for cracks or damage.
• Replace if necessary.
• Replace coolant every 24 months.Ethylene gylcol
anti-freeze coolant.
Replace.
5*Brake system • Adjust free play.
• Check and replace pads if necessary.
Replace brake fluid.
6*Clutch• Check operation and fluid leakage. (See NOTE page 6-6.)
• Correct if necessary.
7*Final gear oil• Check vehicle for leakage.
• Replace every 16,000 mi (25,000 km) or 24 months.
SAE 80 API “GL-4”
hypoid gear oil
Replace.CheckReplace.
8*Control cable• Apply chain lube thoroughly.Yamaha chain and cable lube or SAE 10W30 motor oil
9*Rear arm pivot bearing• Check bearing assembly for looseness.
• Moderately repack every 16,000 mi (25,000 km).
Medium weight wheel bearing grease.Repack.
10Brake/Clutch lever pivot shaft• Apply chain lube lightly.Yamaha chain and cable lube or SAE 10W30 motor oil
11Brake pedal and shift pedal shaft• Lubricate
• Apply chain lube lightly.
Yamaha chain and cable lube or SAE 10W30 motor oil
12*Sidestand pivot• Check operation and lubricate.
• Apply chain lube lightly.
Yamaha chain and cable lube or SAE 10W30 motor oil
13*Sidestand switch• Check and clean or replace if necessary.
14*Front fork•Check operation and for leakage.
15*Steering bearings• Check bearing assembly for looseness.
• Moderately repack every 16,000 mi (25,000 km) 24 months.
Medium weight wheel bearing grease.Repack.
16*Wheel bearings• Check bearings for smooth rotation.
17*Rear suspension link pivots• Apply grease lightly.Molybdenum disulfide grease

* Since these items require special tools, data and technical skills, they should be serviced by a Yamaha dealer.

Note:
● For odometer readings of time periods higher than 20,000 mi (31,000 km) or 30 months, repeat the same maintenance as listed in the chart form the 4,000 mi (7,000 km) or 6-month interval.

Note:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.

● Hydraulic brake and clutch systems
– After disassembling the master cylinders, caliper or clutch release cylinder, always replace the brake fluid. Check the brake fluid level of the master cylinder, caliper and clutch release cylinder every two years.
– Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
– Replace the brake and clutch hoses every four years, or if cracked or damaged.

About the 2000 Yamaha Royal Star Tour Classic

Moved around a torquey 1294cc V4 v-twin one simply doesn’t meet everyday, this machine packs plenty of power for both effortless uphill rides and blazing fast highway runs, two-up and fully-loaded.

Add in auxiliary lights, a generous windscreen, plush seating, studded saddlebags and a passenger backrest for a trim which is truly inviting and road-ready.

Manual for the 2000 Yamaha Royal Star Tour Classic

2000 Yamaha Royal Star Tour Classic Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2000 Yamaha Royal Star Tour Classic.

You can download it from Yamaha’s website here.