Motorcycles | Sport Touring | Yamaha

2003 Yamaha FJR1300A Maintenance Schedule and Service Intervals

2003 Yamaha FJR1300A- Stock Image

This is the maintenance schedule and associated service intervals for the 2003 Yamaha FJR1300A.

2003 Yamaha FJR1300A Maintenance Schedule

Below is the maintenance schedule for the 2003 Yamaha FJR1300A.

The maintenance for the 2003 Yamaha FJR1300A is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

No.ItemRoutine 600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Valve clearance•Check and adjust valve clearance when engine is coldEvery 26600 mi (42000 km)
2Spark plugs•Check condition.
•Adjust gap and clean.
•Replace at 8,000 mi (13,000 km) or 12 months
ReplaceReplace
3*Crankcase ventilation system•Check ventilation hose for cracks or damage.
•Replace if necessary.
4*Fuel line•Check fuel hoses and vacuum hose for cracks or damage.
•Replace if necessary.
5*Mulfler and exhaust pipe•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
6*Electronic fuel injection•Check and adjust engine idle speed.
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.
8*Air induction system•Check the air cut-off valve, reed valve, and hose for damage
•Replace any damaged parts if necessary

*Since this items require specified tools, data and technical skills, have a Yamaha dealer perform the service

General Maintenance and Lubrication Chart

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1Engine oil•Replace
•Warm engine before draining
2*Engine oil filter cartridge•Replace
3*Air filter element•Check condition/clean
*•Replace
4*Cooling system•Check hose for cracks or damage
•Replace if necessary
*•Replace with ethylene glycol anti-freeze coolant every 24 monthsReplace
5*Brake system•Check operation, fluid level, and fluid leakage (See NOTE on page 6-7)
•Correct if necessary
6*Clutch•Check operation and for fluid leakage (See NOTE on page 6-7)
•Correct if necessary
7*Control cables•Apply Yamaha chain and cable lube or engine oil SAE 10W30 (API SE) thoroughly
8*Swingarm pivot bearing•Check swingarm pivot for play
•Correct if necessary
•Moderately repack every 16000 mi (25000 km) or 24 months with lithium soap base grease
9*Rear suspension link pivots•Check operation
•Correct if necessary

Repack
10*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
11*Front fork•Check operation and for oil leakage.
•Replace if necessary.
12*Steering bearings•Check bearing assembly for looseness
*•Moderately repack with lithium-soap-based grease every 12,000 mi (19,000 km) or 18 months
13Brake and Clutch lever pivot shaft•Apply lithium-soap-based grease lightlyRepack
14Brake pedal and shift pedal shafts•Apply lithium-soap-based grease lightly
15Final gear oil•Check oil level and vehicle for oil leakage
•Change
16*Wheels bearings•Check bearings for smooth operation
17*Sidestand pivot•Check operation
•Apply chain lube or lithium-soap-based grease lightly
18*Sidestand switch•Check and clean or replace if necessary
19*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
20*Brake hoses•Check for cracks or damage
*•Replace (See NOTE on page 6-7)
21*Wheels•Check runout and for damage
22*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary

*Since this items require special tools, data and technical skills, have a Yamaha dealer perform the service.

Note:
From 24000 (37000 km) or 36 months, repeat the maintenance intervals starting from 4000 mi (7000 km) or 6 months.

Note:
● Air filter
• The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas.
● Hydraulic brake and clutch service
• After disassembling the brake or clutch master cylinders or caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Every two years replace the internal components of the brake and clutch master cylinders, caliper cylinders, and clutch release cylinder, and change the brake and clutch fluid
• Replace the brake hoses every four years or if cracked or damaged.
● Engine oil type
• Yamalube 4 (20W-40) or engine oil SAE 20W-40 (API SE) for temperatures of 5°C (40°F) or above.

About the 2003 Yamaha FJR1300A

The 2003 Yamaha FJR1300A has water cooled, 1298cc, DOHC, 4 cylinders, 4-stroke, inline engine. With 1298 cc (79.31 cubic inches) displacement and 3.11 inch × 2.61 inch (oversquare – shortstroke) broke x stroke. With seat height of  31.7 in, weight of 582 lbs., wheelbase of 60.8 inch and trail of 4.3 inch. The 2003 Yamaha FJR1300A has suspension mono shock, swingarm, suspension travel of 4.92  inches, and TCI (Transistor Controlled Ignition) ignition type. Powerful 140.45 HP (103.3 kW) @ 8000 rpm (Ram-air) and 134.4 Nm (99.13lb ft) @ 7000 rpm (Ram-air). Also, with wet, multiple discs, cable operated clutch.

Manual for the 2003 Yamaha FJR1300A

2003 Yamaha FJR1300A Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2003 Yamaha FJR1300A.

You can download it from Yamaha’s website here.

Similar Posts