Categories
Motorcycles Sport Touring Yamaha

2004-2005 Yamaha FJR1300A Maintenance Schedule and Service Intervals

Maintenance schedule and service intervals for the 2004-2005 Yamaha FJR1300A

This is the maintenance schedule and associated service intervals for the 2004-2005 Yamaha FJR1300A.

2004-2005 Yamaha FJR1300A Maintenance Schedule

Below is the maintenance schedule for the 2004-2005 Yamaha FJR1300A.

The maintenance for the 2004-2005 Yamaha FJR1300A is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Fuel line•Check fuel hose for cracks or damage.
•Replace if necessary.
2*Spark plugs•Check condition.
•Adjust gap and clean.
•Replace at 8,000 mi (13,000 km) or 12 months
ReplaceReplace
3*Valve clearance•Check and adjust valve clearance when engine is coldEvery 26600 mi (42000 km)
4*Crankcase breather system•Check ventilation hose for cracks or damage.
•Replace if necessary.
5*Electronic fuel injection
•Check and adjust engine idle speed and synchronization
6*Exhaust system•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.
8*Air induction system•Check the air cut-off valve, reed valve, and hose for damage
•Replace any damaged parts if necessary

*Since this items require specified tools, data and technical skills, have a Yamaha dealer perform the service

General Maintenance and Lubrication Chart

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Air filter element•Clean with compressed air
•Replace if necessary
2*Clutch•Clean operation, fluid leakage
•Correect if necessary
3*Front brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
4*Rear brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
5*Brake hoses•Check for cracks or damage
*•ReplaceEvery 4 years
6*Wheels •Check runout and for damage
•Replace if necessary
7*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary
8*Wheel bearings•Check bearings for smooth operation
•Replace if necessary
9*Swingarm pivot bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease
Repack
10*Steering bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease every 16000 mi (25000 km) or 24 months
Repack
11*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
12Brake and clutch lever pivot shafts•Apply lithium-soap-based grease (all-purpose grease) lightly
13Brake and shift pedal pivot shafts•Apply lithium-soap-based grease (all-purpose grease) lightly
14*Centerstand and sidestand pivots•Check operation
•Apply lithium-soap-based grease (all-purpose grease) lightly
15*Sidestand switch•Check operation and replace if necessary
16*Front fork•Check operation and for oil leakage.
•Replace if necessary.
17*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
18*Rear suspension link pivots•Apply lithium-soap-based grease lightly
19Engine oil•Change (warm engine before draining)
20*Engine oil filter cartridge• Replace.
21*Cooling system•Check hose for cracks or damage
•Replace if necessary
*•Replace with ethylene glycol anti-freeze coolant every 24 monthsChange
22*Final gear oil•Check oil level for oil leakage
•Change at initial 600 mi (1000
km) or 1 month, and thereafter
every 16000 mi (25000 km) or 24
months.
ChangeChange
23*Control cables• Apply Yamaha chain and cable lube or engine oil 10W-30 thoroughly.
24*Throttle grip housing and cable• Check operation and free play.
• Adjust the throttle cable free play
if necessary.
• Lubricate the throttle grip housing
and cable.

*Since this items require special tools, data and technical skills, have a Yamaha dealer perform the service.

Note:
From 24000 (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.

Note:
● The air filter element needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch service
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2004-2005 Yamaha FJR1300A

The 2004 Yamaha FJR1300A is water cooled, 1298cc, inline-4, DOHC with power of 140.45 HP (103.3 kW) @ 8000 rpm and 134.4 Nm (99.13 lb-ft) @ 7000 rpm torque. Featuring 4 cylinders, 4-stroke, inline engine, 1298 cc (79.31 cubic inches) displacement, and 3.11 inch × 2.61 inch (oversquare – shortstroke) bore x stroke. Comes with seat height of 31.7 inch , 582 lbs dry weight, 60.8 inch wheelbase and 5.31 inch ground clearance. It’s physical measures has of 87.8 inch length, 29.5 inch width and 51.8 inch height. Suspension mono shock, swingarm, suspension travel of 4.92  inches, and tire pressure of 0.17 PSI, with pillion: 0.17 PSI with pillion.

Manual for the 2004-2005 Yamaha FJR1300A

2004-2005 Yamaha FJR1300A Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2004-2005 Yamaha FJR1300A.

You can download it from Yamaha’s website here.