This is the maintenance schedule with associated service intervals for the 2005 Kawasaki Vulcan 1500 Classic.
The Kawasaki Vulcan 1500 Classic is a cruiser style motorcycle. The Vulcan name has been used for custom or cruiser motorcycles since 1984, model designation VN, using mostly V-twin engines ranging from 125 to 2,053 cc (7.6 to 125.3 cu in).
This maintenance schedule applies to the following model:
- 2005 Kawasaki Vulcan 1500 Classic FI
The Vulcan 1500 Classic has a 1,470 cc (90 cu in) liquid-cooled SOHC 50° V-twin engine with a single-pin crankshaft paired with a 5-Speed transmission. It has a 27.6-inch (700 mm) seat height, wide handlebar, forward-mounted floorboards.
Maintenance Schedule for 2005 Kawasaki Vulcan 1500 Classic
Below is the maintenance schedule for the 2005 Kawasaki Vulcan 1500 Classic.
The following is the list of maintenance operations and to be done on this motorcycle with a time or distance interval — whichever comes earlier.
The maintenance for the 2005 Kawasaki Vulcan 1500 Classic is broken into two sections: Emission Related, and Non-Emission Related.
Periodic Maintenance Chart
|Operation||Every||1000 km (600 mi)||6000 km (4000 mi)||12000 km (7500 mi)||18000 km (12000 mi)||24000 km (15000 mi)||30000 km (20000 mi)||36000 km (24000 mi)|
|Idle speed–check †||•||•||•||•|
|Throttle control sysytem–check †||•||•||•||•||•||•||•|
|Spark plug–clean and gap †||•||•||•||•||•||•|
|Air suction valve – check †||•||•||•||•||•||•|
|Air cleaner element–clean †#||•||•||•|
|Evaporative emission control system (Cal) – check †||•||•||•||•||•||•||•|
|K||Brake/clutch hoses, connections – check †||•||•||•||•||•||•|
|Brake light switch – check †||•||•||•||•||•||•||•|
|Brake pad wear – check †#||•||•||•||•||•||•|
|Brake/clutch fluid level – check †||month||•||•||•||•||•||•||•|
|K||Brake/clutch fluid – change||2 years||•|
|K||Fuel hose, connections – check||•||•||•||•||•||•|
|K||Steering –check †||•||•||•||•||•||•||•|
|Final gear case oil level – check †||•||•||•|
|Final gear case oil – change||•||•|
|K||Propeller shaft joint – lubricate||•||•|
|Nut, bolt, fastener tightness – check †||•||•||•||•|
|K||Spoke tightness and rim runout – check †||•||•||•||•||•||•||•|
|Tire wear – check †||•||•||•||•||•||•|
|Engine oil – change #||6 months||•||•||•||•||•||•||•|
|Oil filter – replace||•||•||•||•|
|General lubrication – perform||•||•||•|
|K||Front fork oil – change||2 years||•|
|Front fork oil leak – check †||•||•||•|
|Rear shock absorber oil leak – check †||•||•||•|
|K||Swingarm pivot – lubricate||•||•|
|K||Coolant – change||2 years||•|
|Radiator hoses, connectinos – check †||•|
|K||Steering stem bearing – lubricate||2 years||•|
|K||Brake/clutch master cylinder cup and dust seal – replace||4 years|
|K||Coolant filter – clean||year|
|K||Caliper piston seal and dust seal – replace||4 years|
|K||Clutch slave cylinder piston seal – repalce||4 years|
K: Should be serviced by an authorized Kawasaki dealer
*: For higher odometer readings, repeat at the frequency interval established here
†: Replace. add. adjust, or torque if necessary.
#: Service more frequently when operation in severe conditions: dusty, wet, muddy, high speed, or frequent starting/stopping
(Cal): California model only
Tyre size and tyre pressure for the 2005 Kawasaki Vulcan 1500 Classic
The 2005 Kawasaki Vulcan 1500 Classic has the following tyres and tyre sizes standard (tube type):
- Size: 130/90-16 67H
- BRIDGESTONE “EXEDRA G703G L”
- DUNLOP “D404FU”
- Size: 150/80 B16 M/C 71H
- BRIDGESTONE “EXEDRA G702 L”
- DUNLOP “D404L”
The manual for the 2005 Kawasaki Vulcan 1500 Classic recommends the following tyre pressures (when cold):
- Front (up to 183 kg load [403 lbs): 200 kPa/28 psi
- Rear (up to 97.5 kg Load [215 lb]): 250 kPa/36 psi
- Rear (97.5-183 kg load [215-403 lb]): 280kPa/40psi
General information about the 2005 Kawasaki Vulcan 1500 Classic
The 2005 Kawasaki Vulcan 1500 Classic has an advanced, liquid-cooled, SOHC design, displaces 90 cubic inches, and shines with elegantly sculpted cylinders and polished cooling fins, while the large radiators are tucked from view between the frame downtubes.
Other engine features include a large airbox crossover tube that helps improve mid-range torque and increases airflow to the 40mm Keihin carburetor with Kawasaki Throttle Responsive Ignition Control (K-TRIC) system. A throttle position sensor is connected to the electronic ignition to vary ignition timing according to throttle setting and engine rpm. The result is better engine response and lower fuel consumption.
Both of the big V-twin’s cylinders have four valves actuated by a single overhead cam. Hydraulic valve lash adjusters automatically maintain valve clearance for smooth. Engine performance, reduced noise, and no maintenance while automatic cam chain tensioners keep cam timing accurate. An extra-low 27.6-inch seat height, wide handlebar, forward-mounted floorboards, and plush suspension system make the 1500 Classic a comfortable ride.
Manual for the 2005 Kawasaki Vulcan 1500 Classic
The above maintenance schedule comes directly from the user’s manual for the 2005 Kawasaki Vulcan 1500 Classic, which is available here.