Categories
Motorcycles Cruiser Yamaha

2009-2010 Yamaha Raider Maintenance Schedule and Service Intervals

Maintenance schedule and service intervals for the 2009-2010 Yamaha Raider

This is the maintenance schedule and associated service intervals for the 2009-2010 Yamaha Raider.

2009-2010 Yamaha Raider Maintenance Schedule

Below is the maintenance schedule for the 2009-2010 Yamaha Raider.

The maintenance for the 2009-2010 Yamaha Raider is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Fuel line•Check fuel hoses for cracks or damage.
•Replace if necessary.
2*Spark plugs•Check condition.
•Adjust gap and clean.
•Replace at 8,000 mi (13,000 km) or 12 months
ReplaceReplace
3*Valve clearance•Check and adjust valve clearance when engine is cold
•Adjust if necessary
Every 16000 mi (25000 km)
4*Crankcase breather system•Check breather hose for cracks or damage.
•Replace if necessary.
5*Fuel injection•Adjust synchronization
6*Exhaust system•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.

*Since these items require special tools, data and skills, have a Yamaha dealer perform the service.

General Maintenance and Lubrication Chart

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Air filter element•ReplaceEvery 24000 mi (37000 km)
2*Clutch•Check operation, and fluid leakage
•Correct if necessary
3*Front brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
4*Rear brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
5*Brake hoses•Check for cracks or damage
*•ReplaceEvery 4 years
6*Wheels •Check runout and for damage
•Replace if necessary
7*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary
8*Wheel bearings•Check bearings for smooth operation
•Replace if necessary
9*Swingarm pivot bearings•Check bearing assembly for looseness
10*Drive belt•Check belt tension
•Adjust if necessary
Every 2500 mi (4000 km)
11*Steering bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease every 16000 mi (25000 km) or 24 months
Repack
12*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
13Brake lever pivot shaft•Apply silicone grease lightly
14Brake pedal pivot shaft•Apply lithium-soap-based grease lightly
15Clutch lever pivot shaft•Apply silicone grease lightly
16Shift pedal pivot shaft•Apply lithium-soap-based grease lightly
17Sidestand pivot•Check operation
•Apply lithium-soap-based grease lightly
18*Sidestand switch•Check operation and replace if necessary
19*Front fork•Check operation and for oil leakage.
•Replace if necessary.
20*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
21*Rear suspension link pivots•Apply lithium-soap-based grease lightly
22Engine oil•Change (warm engine before draining)
23*Engine oil filter cartridge• Replace.
24*Transfer case oil•Check for leakage
•Change at initial 600 mi (1000 km) or 1 month, and thereafter every 16000 mi (25000 km) or 24 months
ChangeChange
25*Front and rear brake switches•Check operation
26*Control cables•Apply Yamaha chain lubricant or other suitable cable lubricant thoroughly
27*Throttle grip housing and cable•Check operation and free play
•Adjust throttle cable free play and adjust if necessary.
•Lubricate cable and grip housing and cable
28*Light, signals and switches•Check operation
•Adjust headlight beam

*Since these items require special tools, data and skills, have a Yamaha dealer perform the service.

Note:
From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.

Note:
●Air filter
•This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with compressed air to avoid damaging it
•The air filter element needs to be replaced more frequent when riding in unusually wet or dusty areas
● Hydraulic brake and clutch systems
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2009-2010 Yamaha Raider

2010 Yamaha Raider has 113-cubic-inch (1854cc) air-cooled, OHV with 4 valves per cylinder, pushrod 48-degree V-twin pumps out max torque at just 2500 rpm and max power at 4500 rpm. With four pushrod-activated valves and two spark plugs per cylinder, 9.48:1 compression ratio and aggressive cam timing increase power output and a 3.5-liter airbox is hidden in the area below the fuel tank for great performance and clean styling. Two-into-one-into-two exhaust with Exhaust Ultimate Power valve (EXUP®) inside boosts torque in the 2500-3500-rpm range. Custom 5-spoke wheels carry a 120/70-21-inch bias tire up front, and a wide, 210/40-18 radial out back and flangeless fuel tank carries a full 4.1 gallons of fuel.

Manual for the 2009-2010 Yamaha Raider

2009-2010 Yamaha Raider Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2009-2010 Yamaha Raider.

You can download it from Yamaha’s website here.