Motorcycles | Honda | Honda Cruisers

2010-2011 Honda Fury Maintenance Schedule and Service Intervals

2010-2011 Honda Fury Stock Image

This is the maintenance schedule and associated service intervals for the 2010-2011 Honda Fury.

This maintenance schedule applies to the following models:

  • 2010-2011 Honda Fury

The Honda Fury is a cruiser motorcycle intended for on-road riding. Long and lean, stretches nearly six feet from axle to axle, one of the cleanest choppers ever. The Fury’s 1312cc V-twin engine delivers all the power and torque you need to motivate down the road. The deep saddle and cut-down rear fender combined with the sweep of the fuel tank give it that stretched, custom look.

This page contains affiliate links.

2010-2011 Honda Fury Maintenance Schedule

Below is the maintenance schedule for the 2010-2011 Honda Fury.

The maintenance for the 2010-2011 Honda Fury is broken into two sections: Emission-Related Items and Non-Emission-Related Items.

Periodic Maintenance Chart

Itemsx 1000 mi0.64812162024
Emission-Related ItemsNOTEx 100 km1064128192256320384
*Fuel LineIII
*Throttle OperationIII
Air Cleaner2RR
Crankcase Breather3CCCCCC
Spark PlugsIRIRIR
*Valve ClearanceIIII
Engine OilInitial = 600 mi (1,000 km) or 1 month: R
Regular = Every 8,000 mi (12,800 km) or 12 months: R
Engine Oil FilterRRRR
*Engine Idle SpeedIIIIIII
Radiator Coolant5IIR
*Cooling SystemIII
*Secondary Air Supply SystemIII
*Evaporative Emission Control System4II
Non-Emission-Related Items
Final Drive OilIIR
Brake Fluid5IIRIIR
Brake Pads WearIIIIII
Brake SystemIIII
*Brake Light SwitchIII
*Headlight AimIII
Clutch SystemIIIIIII
Side StandIII
*Nuts, Bolts, FastenersIIII
**Steering Head BearingsIIII
  • *Should be serviced by your Honda dealer, unless you have the proper tools and service data and are mechanically qualified. Refer to the official Honda Service Manual.
  • **In the interest of safety, we recommend these items be serviced only by your Honda dealer.

Maintenance Procedures:

  • I: inspect and clean, adjust, lubricate, or replace, if necessary
  • C: clean
  • A: adjust
  • L: lubricate
  • R: replace


  • 1. At higher odometer readings, repeat at the frequency interval established here.
  • 2. Service more frequently if the motorcycle is ridden in unusually wet or dusty areas.
  • 3. Service more frequently if the motorcycle is ridden often at full throttle or in the rain.
  • 4. California type only.
  • 5. Replace every 2 years, or at indicated odometer interval, whichever comes first. Replacement requires mechanical skill.

Tyre size and tyre pressure for the 2010-2011 Honda Fury

The 2010-2011 Honda Fury has the following tyres and tyre sizes standard:

  • Front: 90/90 21M/C 54H
  • Rear: 200/50R18M/C 76H

Tire type:

  • Front: bias-ply, tubeless
  • Rear: radial, tubeless

Recommended Tires:

  • Front: DUNLOP ELITE3

The manual for the 2010-2011 Honda Fury recommends the following tyre pressures (when cold):

  • Front: 33 psi (225 kPa , 2.25 kgf/cm)
  • Rear: 41 psi (280 kPa , 2.80 kgf/cm )

About the 2010-2011 Honda Fury

The Honda Fury is without a doubt one of the most stylish motorcycles in is class. Its radical design will certainly turn a lot of heads, while its roaring engine helps you get a healthy dose of adrenaline each time you jump on its saddle.

Talking about the engine, the Honda Fury is propelled by a liquid – cooled, 52 degrees, V – twin, SOHC unit with a displacement of 1312 cc. The engine features PGM-FI with automatic Enricher circuit and is mated on a five speed transmission.

The motorcycle’s backbone is represented by a high-tensile steel frame which further enhances the bike’s handling. The stopping power is handled by a single 336 mm diameter front-disc brake which is paired with a 296 mm brake disc in the back. An ABS system is also available as an option

A raked-out front end and condensed, hard-tail look to the rear, plus a stretched wheelbase. And that long wheelbase is no illusion—the Fury stretches a full 71.2 inches between axles. The Fury’s high-tensile steel frame is the centerpiece to this machine’s open, minimalist chopper styling.

The Fury’s engine features specially designed camshafts that also add to the unique V-twin sound and power-pulse exhaust sensations. A fat 200-series rear tire is paired with a slim 21-inch front tire, both wrapped around distinctive alloy wheels.

Manual for the 2010-2011 Honda Fury

2010-2011 Honda Fury Maintenance Schedule Screenshot From Manual

The above maintenance schedule comes directly from the user’s manual for the 2010-2011 Honda Fury.

You can download it from here.

Similar Posts