Categories
Motorcycles Ducati Hypermotard

2010-2012 Ducati Hypermotard 796 Maintenance Schedule

Maintenance Schedule and Service Intervals for the 2010-2012 Ducati Hypermotard 796

The 2010-2012 Ducati Hypermotard 796 maintenance schedule and service intervals — sourced from the owner’s manual.

This applies to these models:

  • 2010 Ducati Hypermotard 796
  • 2011 Ducati Hypermotard 796
  • 2012 Ducati Hypermotard 796

Regular maintenance for the 2010-2012 Ducati Hypermotard 796

This is maintenance that you can do yourself (though the manual says you need a dealer to do it).

Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:

Checking the engine oil level
Check the brake and clutch fluid levels
Check tyre pressure and wear
Check the drive chain tension and lubrication
Check the brake pads. If necessary, contact your dealer to renew pads

2010-2012 Ducati Hypermotard 796 Maintenance Schedule Table

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

This maintenance schedule is in the same format as in the manual, though altered to fit this screen.

The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.

km x1000 11224364860
miles x1000 0.67.51522.53037.5
Months61224364860
Change the engine oil
Change the engine oil filter
Clean the engine oil pick-up filter
Check the engine oil pressure
Check/adjust the valve clearances (1)
Check the tension of the timing belts (1)
Renew the timing belts
Check and clean the spark plugs. Renew if necessary
Check and clean the air filter (1)
Change the air filter
Check throttle body synchronisation and idle speed setting (1)
Check the brake and clutch fluid levels
Change the clutch and brake fluid
Check and adjust the brake and clutch control cables
Check/lubricate the throttle/choke cables
Check tyre pressure and wear
Check the brake pads. Change if necessary
Check the steering head bearings
Check the drive chain tension, alignment and lubrication
Check the clutch disc pack. Change if necessary (1)
Check the rear wheel cush drive
Check the wheel hub bearings
Check the indicators and lighting
Check tightness of nuts and bolts securing the engine to the frame
Check the sidestand
Check tightness of the front wheel axle nut
Check tightness of the rear wheel axle nut
Check the external fuel hoses
Change the front fork oil
Check the forks and rear shock absorber for oil leaks
Check the front sprocket retaining bolts
General lubrication and greasing
Check and recharge the battery
Road test the motorcycle
General cleaning

(1) Operation to be carried out only at the specified distance intervals.

General Information on the 2010-2012 Ducati Hypermotard 796

Ducati’s entry-level 803cc Hypermotard 796 is a stormer of a machine. It’s 12kg lighter and its seat is 20mm lower than the Hypermotard 1100, which makes it easier to ride and in the real world, and every bit as fast from A to B. 

2010-2012 Ducati Hypermotard 796 Owner’s Manual

2010-2012 Ducati Hypermotard 796 Owner's Manual Screenshot

The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.