Categories
Motorcycles Ducati Superbike

2010 Ducati 848 HAYDEN Maintenance Schedule

Maintenance Schedule and Service Intervals for the 2010 Ducati 848 HAYDEN

The 2010 Ducati 848 HAYDEN maintenance schedule and service intervals — sourced from the owner’s manual.

The service intervals are very similar to those of the 2009-2010 Ducati 1198

Regular maintenance for the 2010 Ducati 848 HAYDEN

This is maintenance that you can do yourself (though the manual says you need a dealer to do it).

Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:

Check the engine oil level
Check the brake and clutch fluid level
Check tyre pressure and wear
Check the drive chain tension and lubrication
Check the brake pads. If necessary, contact your dealer to renew pads

2010 Ducati 848 HAYDEN Maintenance Schedule Table

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

This maintenance schedule is in the same format as in the manual, though altered to fit this screen.

The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.

Km. x100011224364860
mi. x1,0000.67.51522.53037.5
Months61224364860
Change engine oil
Change engine oil filter
Clean engine oil filter at intake
Check engine oil pressure
Check/adjust the valve clearances (1)
Check the tension of the timing belts (1)
Change timing belts
Check and clean the spark plugs. Renew if necessary
Check and clean air filter (1)
Change the air filter
Check throttle body synchronisation and idle speed setting (1)
Check the brake and clutch fluid levels
Change the clutch and brake fluid
Check and adjust the brake and clutch control cables
Check/lubricate the throttle/choke cables
Check tyre pressure and wear
Check the brake pads. Renew if necessary
Check the steering head bearings
Check the drive chain tension, alignment and lubrication
Check the clutch disc pack. Renew if necessary (1)
Checking the coolant level
Change the coolant
Check operation of electric fans and sealing of coolant circuit
Check the rear wheel cush drive
Check the wheel hub bearings
Check the indicators and lighting
Check tightness of nuts and bolts securing the engine to the frame
Check the sidestand
Check tightness of the front wheel axle nut
Check tightness of the rear wheel axle nut
Check the external fuel hoses
Change the front fork oil
Check the forks and rear shock absorber for oil leaks
Check the front sprocket retaining bolts
General lubrication and greasing
Check and recharge the battery
Road test the motorcycle
General cleaning

(1) Operation to be carried out only at the specified distance intervals.

General Information on the 2010 Ducati 848 HAYDEN

Ducati’s latest idea of a middleweight resumes to combining a 370 pounds dry weight with the 134 hp at 10000 rpm and 70.8 lb-ft of torque at 8250 rpm developed by the liquid-cooled 849.4 cc, L-Twin cylinder, four valves per cylinder Desmodromic engine, which was specially developed for the bike.


The tubular steel trellis frame meeting the fully adjustable 43mm Showa upside-down fork at a 24.5-degree angle and the fully adjustable Showa monoshock are all the result of the Ducati 848 being built with performance in mind. The bike rides on Marchesini 5-spoke light alloy 17-inch wheels with Pirelli Diablo Supercorsa rubber.

2010 Ducati 848 HAYDEN Owner’s Manual

2010 Ducati 848 HAYDEN Owner's Manual Screenshot

The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.