Categories
Motorcycles Dirt Bike Yamaha

2011-2013 Yamaha TW 200 Maintenance Schedule and Service Intervals

Maintenance schedule and service intervals for the 2011-2013 Yamaha TW 200

This is the maintenance schedule and associated service intervals for the 2011-2013 Yamaha TW 200.

2011-2013 Yamaha TW 200 Maintenance Schedule

Below is the maintenance schedule for the 2011-2013 Yamaha TW 200

The maintenance for the 2011-2013 Yamaha TW 200 is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

Tip:
• From 19000 mi (31000 km) or 36 months, repeat the maintenance intervals starting from 7000 mi (11000 km) 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (6,000 km) or 6 months 7,000 mi (11,000 km) or 12 months10,000 mi (16,000 km) or 18 months13,000 mi (21,000 km) or 24 months16,000 mi (26,000 km) or 30 months
1*Fuel line•Check fuel hose for crack or damage.
•Replace if necessary.
2Spark plug• Check condition.
• Adjust gap and clean.
• Replace at 7,000 mi (11,000 km) or 12 months and thereafter every 6,000 mi (10,000 km) or 12 months.
ReplaceReplace
3Spark arrester• Clean
4*Valve clearance• Check and adjust valve clearance when engine is cold.
5*Idle speed•Check and adjust engine idle speed.
6*Exhaust system• Check for leakage
• Tighten if necessary.
• Replace gaskets if necessary.
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.

General Maintenance and Lubrication Chart

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (6,000 km) or 6 months 7,000 mi (11,000 km) or 12 months10,000 mi (16,000 km) or 18 months13,000 mi (21,000 km) or 24 months16,000 mi (26,000 km) or 30 months
1*Air Filter element• Clean with solvent.
• Replace if necessary.
2*Battery• Check specific gravity and breather hose for proper operation.
3*Clutch• Check operation.
• Adjust or replace cable.
4*Front Brake• Check operation, fluid level, and for fluid leakage.
• Adjust brake pedal free play and replace brake shoes if necessary.
5*Rear Brake• Check operation.
• Adjust brake pedal free play and replace brake shoes if necessary.
6*Brake Hose• Check for cracks or damage.
• ReplaceEvery 4 years
7*Wheels• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
8*Tires• Check tread depth and for damage.
• Repalce if necessary.
• Check air pressure.
• Correct if necessary.
9*Wheel bearings• Check bearings for smooth operation.
• Replace if necessary.
10*Swingarm pivot bushes• Check bush assemblies for looseness.
• Apply lithium-soap-based grease until new grease shows.
11Drive chain• Check chain slack, alignment and condition.
• Adjust and thoroughly lubricate chain with Yamaha chain and cable lube.
Every 300 mi (500 km) and after washing the motorcycle or riding in the rain or wet areas
12*Steering bearings• Check bearing assemblies for looseness.
• Moderately repack with lithium-soap-based grease every 10,000 mi (16,000 km) or 18 months.
Repack
13*Chassis fasteners• Check all chassis fitting and fasteners.
• Correct if necessary.
14Brake lever pivot shaft• Apply silicone grease lightly.
15Brake pedal pivot shaft• Apply lithium-soap-based grease lightly.
16Clutch lever pivot shaft• Apply lithium-soap-based grease lightly.
17Sidestand pivots and kick crank boss• Check operation.
• Apply lithium-soap-based grease lightly.
18*Sidestand switch• Check operation and replace if necesarry.
19*Front fork• Check operation and for oil leakage.
• Replace if necessary.
20*Shock absorber assembly• Check operation and for oil leakage.
• Replace if necessary.
21Engine Oil• Change (warm-up engine before draining).
22Engine oil filter element• Clean.
23Engine oil strainer• Clean.
24*Front and rear brake switches• Check operation.
25*Control and meter cables• Apply Yamaha chain and cable lube or engine oil thoroughly.
26*Throttle grip housing and cable• Check operation and free play.
• Adjust the throttle cable free play if necessary.
• Lubricate the throttle grip housing and cable.
27*Lights, signals and switches• Check operation.
• Adjust headlight beam.

Tip:
• The air filter needs more frequent service if you are riding in unusually wet or dusty areas.

Hydraulic brake system
• When disassembling the master cylinder or caliper cylinder, always replace the brake fluid. Check the brake fluid level regularly and fill as required.
• Repalce the oil seals on the inner parts of the master cylinder and caliper cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2011-2013 Yamaha TW 200

Anyone can enjoy an impressive riding experience with this Yamaha Dual Purpose TW200 because of its long list of impressive features and comfortable ride. At the heart of this vehicle, you’ll find a 196cc air-cooled, four-stroke single, smooth-shifting five-speed transmission with manual clutch, internal engine counterbalance, and a maintenance-free CDI ignition system to ensure accurate, dependable spark for peak engine performance at all rpm.

Furthermore, the chassis includes the 33mm telescopic front fork with 6.3 inches of travel, lightweight box section swingarm and single rear shock with 5.9 inches of travel, and the hydraulic front disc brake that ensures better stopping power with less effort. To get a better comfortable position, you’ll be provided with the big fat tires along with a low seat and compact chassis.You’ll also get the standard instrumentation including a speedometer with odometer and resettable tripmeter as well as indicator lights for neutral, high beam, and turn signals.

Manual for the 2011-2013 Yamaha TW 200

2011-2013 Yamaha TW 200 Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2011-2013 Yamaha TW 200.

You can download it from Yamaha’s website here.