Sport Touring | Motorcycles | Yamaha

2011 Yamaha FJR1300A Maintenance Schedule and Service Intervals

2011 Yamaha FJR1300A- Stock Image

This is the maintenance schedule and associated service intervals for the 2011 Yamaha FJR1300A.

2011 Yamaha FJR1300A Maintenance Schedule

Below is the maintenance schedule for the 2011 Yamaha FJR1300A.

The maintenance for the 2011 Yamaha FJR1300A is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

TIP:
• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1*Fuel line•Check fuel hoses for cracks or damage.
•Replace if necessary.
2*Spark plugs•Check condition.
•Adjust gap and clean.
•Replace at 8,000 mi (13,000 km) or 12 months
ReplaceReplace
3*Valve clearance•Check and adjust valve clearance when engine is coldEvery 26600 mi (42000 km)
4*Crankcase breather system•Check breather hose for cracks or damage.
•Replace if necessary.
5*Fuel injection•Check and adjust engine idle speed and synchronization
6*Exhaust system•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.
8*Air induction system•Check the air cut-off valve, reed valve, and hose for damage
•Replace any damaged parts if necessary

General Maintenance and Lubrication Chart

No.ItemRoutine600 mi (1,000 km) or 1 month4,000 mi (7,000 km) or 6 months8,000 mi (13,000 km) or 12 months12,000 mi (19,000 km) or 18 months16000 mi (25,000 km) or 24 months20000 mi (31,000 km) or 30 months
1Air filter element•Clean with compressed air
•Replace if necessary
2*Clutch•Clean operation, fluid leakage
•Correect if necessary
3*Front brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
4*Rear brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
5*Brake hoses•Check for cracks or damage
•Check for correct routing and clamping
*•ReplaceEvery 4 years
6*Wheels •Check runout and for damage
•Replace if necessary
7*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary
8*Wheel bearings•Check bearings for smooth operation
•Replace if necessary
9*Swingarm pivot bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease
Repack
10*Steering bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease every 16000 mi (25000 km) or 24 months
Repack
11*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
12Brake lever pivot shaft•Apply silicone grease lightly
13Brake pedal pivot shaft•Apply lithium-soap-based grease lightly
14Clutch lever pivot shaft•Apply silicone grease lightly
15Shift pedal pivot shaft•Apply lithium-soap-based grease lightly
16*Centerstand and sidestand pivots•Check operation
•Apply lithium-soap-based grease lightly
17*Sidestand switch•Check operation and replace if necessary
18*Front fork•Check operation and for oil leakage.
•Replace if necessary.
19*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
20*Rear suspension link pivots•Apply lithium-soap-based grease lightly
21Engine oil•Change (warm engine before draining)
22*Engine oil filter cartridge• Replace.
23*Cooling system•Check hoses for cracks or damage
•Replace if necessary
*•Change with ethylene glycol anti-freeze coolant every 24 monthsChange
24*Final gear oil•Check oil level for oil leakage
•Change at initial 600 mi (1000
km) or 1 month, and thereafter
every 16000 mi (25000 km) or 24
months.
ChangeChange
25*Front and rear brake switches•Check operation
26*Control cables•Apply Yamaha chain and cable lube or engine oil 10W-30 thoroughly.
27*Throttle grip cable•Check operation and free play.
•Adjust the throttle cable free play
if necessary.
•Lubricate the throttle grip housing
and cable.
28*Light, signals and switches•Check operation
•Adjust headlight beam

Note:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch service
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2011 Yamaha FJR1300A

The 2011 Yamaha FJR1300A features 1298cc, DOHC, 16-valve, liquid-cooled in-line four engine delivers serious power and torque (99.1 ft-lbs of torque @ 6000 rpm) for an unequalled spread of muscle over a wide RPM range. Specially designed four-valve per cylinder head features compact, side-driven double-overhead camshafts providing outstanding low to mid rpm torque and horsepower for effortless sport touring and great passing power. Four-into-one-into-two stainless-steel exhaust optimizes engine performance across the power band. High performance, short skirt, forged aluminium pistons are light weight for fast throttle response and also reduce reciprocating mass for less mechanical vibration. Compression ratio is 10.8:1.

Manual for the 2011 Yamaha FJR1300A

2011 Yamaha FJR1300A Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2011 Yamaha FJR1300A.

You can download it from Yamaha’s website here.

Similar Posts