2013-2020 Honda Fury Maintenance Schedule and Service Intervals

This is the maintenance schedule and associated service intervals for the 2013-2020 Honda Fury.

This maintenance schedule applies to the following models:

2013-2020 Honda Fury

The Honda Fury is a cruiser motorcycle intended for on-road riding. Long and lean, stretches nearly six feet from axle to axle, one of the cleanest choppers ever. The Fury’s 1312cc V-twin engine delivers all the power and torque you need to motivate down the road. The deep saddle and cut-down rear fender combined with the sweep of the fuel tank give it that stretched, custom look.

This page contains affiliate links.

2013-2020 Honda Fury Maintenance Schedule

Below is the maintenance schedule for the 2013-2020 Honda Fury.

The maintenance for the 2013-2020 Honda Fury is broken into two sections: Emission-Related Items and Non-Emission-Related Items.

Highlighted element(s) means that there are changes in this year model vs. the previous year model.

Periodic Maintenance Chart

Items		x 1000 mi	0.6	4	8	12	16	20	24
Emission-Related Items		x 1000 km	1	6.4	12.8	19.2	25.6	32	38.4
Fuel Line	X				I		I		I
Throttle Operation	X				I		I		I
Air Cleaner*2						R			R
Crankcase Breather*3				C	C	C	C	C	C
Spark Plug				I	R	I	R	I	R
Valve Clearance	X		I		I		I		I
Engine Oil		Initial = 600 mi (1,000 km) or 1 month: R Regular = Every 8,000 mi (12,800 km) or 12 months: R
Engine Oil Filter			R		R		R		R
Engine Idle Speed	X		I	I	I	I	I	I	I
Radiator Coolant*4					I		I		R
Cooling System	X				I		I		I
Secondary Air Supply System	X				I		I		I
Evaporative Emission Control System*5	X					I			I
Non-Emission-Related Items
Final Drive Oil					I		I		R
Brake Fluid*4				I	I	R	I	I	R
Brake Pads Wear				I	I	I	I	I	I
Brake System			I		I		I		I
Brake Light Switch	X				I		I		I
Headlight Aim	X				I		I		I
Clutch System			I	I	I	I	I	I	I
Side Stand					I		I		I
Suspension	X				I		I		I
Nuts, Bolts, Fasteners	X		I		I		I		I
Wheels/Tires	XX				I		I		I
Steering Head Bearings	XX		I		I		I		I

X: Intermediate. We recommend service by your Honda dealer unless you have the necessary tools and are mechanically skilled. Procedures are provided in an official Honda Service Manual.
XX: Technical. In the interest of safety, have your motorcycle serviced by your dealer.

Maintenance Procedures:

I: Inspect and clean, adjust, lubricate, or replace, if necessary
R: Replace
C: Clean

Notes:

*1: At higher odometer readings, repeat at the frequency interval established here.
*2: Service more frequently if the motorcycle is ridden in unusually wet or dusty areas.
*3: Service more frequently if the motorcycle is ridden often at full throttle or in the rain.
*4: Replace every 2 years, or at indicated odometer interval, whichever comes first. Replacement requires mechanical skill.
*5: 50 STATE (meets California).

Tyre size and tyre pressure for the 2013-2020 Honda Fury

The 2013-2020 Honda Fury has the following tyres and tyre sizes standard:

Front: 90/90-21M/C (54H)
Rear: 200/50R18M/C (76H)

Tire type:

Front: Bias-ply, tubeless
Rear: Radial, tubeless

Recommended Tires:

Front:

DUNLOP D422F
METZELER ME880

Rear:

DUNLOP D423
METZELER ME880

The manual for the 2013-2020 Honda Fury recommends the following tyre pressures (when cold):

Front: 33 psi (225 kPa, 2.25 kgf/cm2)
Rear: 41 psi (280 kPa, 2.80 kgf/cm2)

About the 2013-2020 Honda Fury

The Honda Fury is without a doubt one of the most stylish motorcycles in is class. Its radical design will certainly turn a lot of heads, while its roaring engine helps you get a healthy dose of adrenaline each time you jump on its saddle.

Talking about the engine, the Honda Fury is propelled by a liquid – cooled, 52 degrees, V – twin, SOHC unit with a displacement of 1312 cc. The engine features PGM-FI with automatic Enricher circuit and is mated on a five speed transmission.

The motorcycle’s backbone is represented by a high-tensile steel frame which further enhances the bike’s handling. The stopping power is handled by a single 336 mm diameter front-disc brake which is paired with a 296 mm brake disc in the back. An ABS system is also available as an option

A raked-out front end and condensed, hard-tail look to the rear, plus a stretched wheelbase. And that long wheelbase is no illusion—the Fury stretches a full 71.2 inches between axles. The Fury’s high-tensile steel frame is the centerpiece to this machine’s open, minimalist chopper styling.

The Fury’s engine features specially designed camshafts that also add to the unique V-twin sound and power-pulse exhaust sensations. A fat 200-series rear tire is paired with a slim 21-inch front tire, both wrapped around distinctive alloy wheels.