Categories
Motorcycles Ducati Hypermotard

2013 Ducati Hypermotard SP Maintenance Schedule

Maintenance Schedule and Service Intervals for the 2013 Ducati Hypermotard SP

The 2013 Ducati Hypermotard SP maintenance schedule and service intervals — sourced from the owner’s manual.

Regular maintenance for the 2013 Ducati Hypermotard SP

This is maintenance that you can do yourself (though the manual says you need a dealer to do it).

Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:

Check engine oil level
Check brake fluid level
Check tyre pressure and wear
Check the drive chain tension and lubrication
Check brake pads. If necessary, contact your dealer to replace pads

2013 Ducati Hypermotard SP Maintenance Schedule Table

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

This maintenance schedule is in the same format as in the manual, though altered to fit this screen.

The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.

km x1000 115304560Time
miles x1000 0.69182736Months
Reading of the error memory with DDS and check of
Software version update on control units.
12
Check the presence of any technical updates and recall
campaigns
12
Change engine oil and filter 12
Clean engine oil filter at intake
Check and/or adjust valve clearance
Replace the timing belts 60
Change spark plugs 60
Change the air filter
Check brake fluid level 12
Change brake fluid 36
Check pad wear and brake discs. Replace if necessary12
Check tightening of the safety components (brake disc
flange screws, brake calliper screws, front/rear wheel
nuts, sprocket and final drive sprocket nuts)
12
Check and lubricate the rear wheel shaft
Check the drive chain tension and lubrication12
Check final drive wear (chain, front and rear sprockets)
and chain sliding shoes
12
Visual check of front fork and rear shock absorber seals 12
Change the front fork fluid
Check the freedom of movement and tightening of side
and central stand (if installed)
12
Check rubbing points, clearance, freedom of movement
and positioning of hoses and electric wiring in view
12
Check coolant level 12
Change coolant 48
Check electric fan operation 12
Check tyre pressure and wear 12
Check the battery charge level12
Check idling12
Check the operation of the safety electrical devices (side
stand sensor, front and rear brake switches, engine stop
switch, gear/neutral sensor)
12
Check the indicators and lighting 12
Reset Service indication through DDS
Road test of the motorcycle, testing the safety devices
(ex. ABS and DTC)
12
Softly clean the motorcycle12
Fill out that the service was performed in on-board documentation
(Service Booklet)
12

General Information on the 2013 Ducati Hypermotard SP

Ducati has revealed its new 2013 Hypermotard at the EICMA Motor Show. The new bike is powered by a 821 cc Testastretta 11° DS v-twin engine which features a longer stroke and a smaller bore than what you’d usually find among the 848 cc bikes. The unit cranks out 110 hp and 65.8 lbs.ft of torque at 7750 rpm and needs to deal with a weight of only 436.5 lbs, so you can expect to a mind-blowing speed and a groundbreaking acceleration.

2013 Ducati Hypermotard SP Owner’s Manual

2013 Ducati Hypermotard SP Owner's Manual Screenshot

The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.