2015 Yamaha FJR1300A Maintenance Schedule and Service Intervals

This is the maintenance schedule and associated service intervals for the 2015 Yamaha FJR1300A.
2015 Yamaha FJR1300A Maintenance Schedule
Below is the maintenance schedule for the 2015 Yamaha FJR1300A.
The maintenance for the 2015 Yamaha FJR1300A is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.
Periodic Maintenance Emission Control System
TIP:
• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.
No. | Item | Routine | 600 mi (1,000 km) or 1 month | 4,000 mi (7,000 km) or 6 months | 8,000 mi (13,000 km) or 12 months | 12,000 mi (19,000 km) or 18 months | 16000 mi (25,000 km) or 24 months | 20000 mi (31,000 km) or 30 months | |
1 | * | Fuel line | •Check fuel hoses for cracks or damage. •Replace if necessary. | • | • | • | • | • | |
2 | * | Spark plugs | •Check condition. •Adjust gap and clean. •Replace at 8,000 mi (13,000 km) or 12 months | • | Replace | • | Replace | • | |
3 | * | Valve clearance | •Check and adjust valve clearance when engine is cold | Every 26600 mi (42000 km) | |||||
4 | * | Crankcase breather system | •Check breather hose for cracks or damage. •Replace if necessary. | • | • | • | • | • | |
5 | * | Fuel injection | •Adjust synchronization | • | • | • | • | • | • |
6 | * | Exhaust system | •Check for leakage •Tighten if necessary •Replace gasket(s) if necessary | • | • | • | • | • | |
7 | * | Evaporative emission control system (for California only) | •Check control system for damage. •Replace if necessary. | • | • | ||||
8 | * | Air induction system | •Check the air cut-off valve, reed valve, and hose for damage •Replace any damaged parts if necessary | • | • |
General Maintenance and Lubrication Chart
No. | Item | Routine | 600 mi (1,000 km) or 1 month | 4,000 mi (7,000 km) or 6 months | 8,000 mi (13,000 km) or 12 months | 12,000 mi (19,000 km) or 18 months | 16000 mi (25,000 km) or 24 months | 20000 mi (31,000 km) or 30 months | |
1 | Air filter element | •Clean with compressed air •Replace if necessary | • | • | • | • | • | ||
2 | * | Clutch | •Check operation, fluid leakage •Correect if necessary | • | • | • | • | • | • |
3 | * | Front brake | •Check operation, fluid level, and for fluid leakage •Replace brake pads if necessary | • | • | • | • | • | • |
4 | * | Rear brake | •Check operation, fluid level, and for fluid leakage •Replace brake pads if necessary | • | • | • | • | • | • |
5 | * | Brake hoses | •Check for cracks or damage •Check for correct routing and clamping | • | • | • | • | • | |
* | •Replace | Every 4 years | |||||||
6 | * | Brake fluid | •Replace | Every 2 years | |||||
7 | * | Wheels | •Check runout and for damage •Replace if necessary | • | • | • | • | • | |
8 | * | Tires | •Check thread depth and for damage •Replace if necessary •Check air pressure •Correct if necessary | • | • | • | • | • | |
9 | * | Wheel bearings | •Check bearings for smooth operation •Replace if necessary | • | • | • | • | • | |
10 | * | Swingarm pivot bearings | •Check bearing assembly for looseness •Moderately repack with lithium-soap-based grease | • | Repack | ||||
11 | * | Steering bearings | •Check bearing assembly for looseness | • | • | • | • | • | • |
* | •Moderately repack with lithium-soap-based grease | Every 16000 mi (25000 km) | |||||||
12 | * | Chassis fasteners | •Check all chassis fittings and fasteners •Correct if necessary | • | • | • | • | • | |
13 | Brake lever pivot shaft | •Apply silicone grease lightly | • | • | • | • | • | ||
14 | Brake pedal pivot shaft | •Apply lithium-soap-based grease lightly | • | • | • | • | • | ||
15 | Clutch lever pivot shaft | •Apply silicone grease lightly | • | • | • | • | • | ||
16 | Shift pedal pivot shaft | •Apply lithium-soap-based grease lightly | • | • | • | • | • | ||
17 | * | Centerstand and sidestand pivots | •Check operation •Apply lithium-soap-based grease lightly | • | • | • | • | • | |
18 | * | Sidestand switch | •Check operation and replace if necessary | • | • | • | • | • | • |
19 | * | Front fork | •Check operation and for oil leakage.
•Replace if necessary. | • | • | • | • | • | |
20 | * | Shock absorber assembly | •Check operation and for oil leakage.
•Replace if necessary. | • | • | • | • | • | |
21 | * | Rear suspension link pivots | •Apply lithium-soap-based grease lightly | • | |||||
22 | Engine oil | •Change (warm engine before draining) | • | • | • | • | • | • | |
23 | * | Engine oil filter cartridge | • Replace. | • | • | • | |||
24 | * | Cooling system | •Check hoses for cracks or damage •Replace if necessary | • | • | • | • | • | |
* | •Change coolant | • | |||||||
25 | * | Final gear oil | •Check oil level for oil leakage •Change at initial 600 mi (1000 km) or 1 month, and thereafter every 16000 mi (25000 km) or 24 months. | Change | • | Change | |||
26 | * | Front and rear brake switches | •Check operation | • | • | • | • | • | • |
27 | * | Control cables | •Apply Yamaha chain lubricant or other suitable cable lubricant thoroughly | • | • | • | • | • | • |
28 | * | Throttle grip | •Check operation •Check throttle cable free play and adjust if necessary. •Lubricate cable and grip housing •Lubricate grip warmer wire | • | • | • | • | • | |
29 | * | Light, signals and switches | •Check operation •Adjust headlight beam | • | • | • | • | • | • |
Note:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch systems
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.
About the 2015 Yamaha FJR1300A
The 2015 Yamaha FJR1300A features compact, lightweight 1298cc, DOHC, 16-valve, liquid-cooled inline four-cylinder engine delivers power and torque for an unequaled spread of muscle over a wide rpm range. Four-into-one-into-two stainless-steel exhaust optimizes engine performance across the power band. Standard equipment Unified Braking System w/ABS: The front brake lever activates six of the eight front braking pistons; the rear brake pedal activates two rear pistons and the other two front pistons — provides balanced anti-lock braking in all conditions. Ergonomically shaped, large-capacity, 6.6-gallon fuel tank offers excellent comfort and range and is constructed of steel allowing for the use of magnetic tank bags.
Manual for the 2015 Yamaha FJR1300A

The above information was gleaned from the owner’s manual for the 2015 Yamaha FJR1300A.
You can download it from Yamaha’s website here.