Categories
Motorcycles Ducati Hypermotard

2016-2017 Ducati Hypermotard 939 Maintenance Schedule

Maintenance Schedule and Service Intervals for the 2016-2017 Ducati Hypermotard 939

The 2016-2017 Ducati Hypermotard 939 maintenance schedule and service intervals — sourced from the owner’s manual.

This applies to these models:

  • 2016 Ducati Hypermotard 939
  • 2017 Ducati Hypermotard 939

Regular maintenance for the 2016-2017 Ducati Hypermotard 939

This is maintenance that you can do yourself (though the manual says you need a dealer to do it).

Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:

Checking the engine oil level
Check the brake and clutch fluid level
Check tyre pressure and wear
Check the drive chain tension and lubrication
Check the brake pads. If necessary, contact your dealer to renew pads

2016-2017 Ducati Hypermotard 939 Maintenance Schedule Table

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

This maintenance schedule is in the same format as in the manual, though altered to fit this screen.

The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.

km x1000 115304560Time
miles x1000 0.69182736Months
Reading of the error memory with DDS and check of
software version update on control units
12
Check the presence of any technical updates and recall
campaigns
12
Change engine oil and filter12
Clean the engine oil mesh filter assembly
Check and/or adjust valve clearance
Change timing belts 60
Change spark plugs
Clean air filter
Change air filter
Check brake fluid level 12
Change brake fluid 36
Check brake disc and pad wear. Change, if necessary12
Check the proper tightening of brake calliper bolts and
brake disc flange screws
12
Check frame-to-engine fasteners tightening
Check wheel hub bearings
Check and lubricate the rear wheel shaft
Check the cush drive damper on rear sprocket
Check the proper tightening of final drive front and rear
sprocket nuts
12
Check final drive (chain, front and rear sprocket) and sliding
shoe wear
12
Check final drive chain tension and lubrication 12
Check steering bearings and lubricate, if necessary
Change front fork fluid
Visually check the front fork and rear shock absorber
seals
12
Check the freedom of movement and tightening of the
side and central stand (if any)
12
Visually check the fuel lines12
Check rubbing points, clearance, freedom of movement
and positioning of hoses and electric wiring in view
12
Lubricate the levers at the handlebar and pedal controls 12
Change coolant 48
Check the coolant level and check circuit for damage 12
Check tyre pressure and wear 12
Check the battery charge level 12
Check idling12
Check the operation of all electric safety devices (side
stand sensor, front and rear brake switches, engine kill
switch, gear/neutral sensor)
12
Check lighting, turn indicators, horn and controls 12
Reset the Service indication through the DDS 2.0
Final test and road test of the motorcycle, testing safety
devices (ex. ABS and DTC), electric fans and idling
12
Softly clean the motorcycle12
Fill out that the service was performed in on-board documentation
(Service Booklet)
12

General Information on the 2016-2017 Ducati Hypermotard 939

Ducati updated its Hypermotard for the 2016 model year and carried that forward to 2018. Fairly fresh off a revamp in ’13, the new Hypermotard variant brings Ducati’s EURO 4-emissions compliant Testastretta to the range along with its increased, 937 cc displacement and 113-pony output.

2016-2017 Ducati Hypermotard 939 Owner’s Manual

2016-2017 Ducati Hypermotard 939 Owner's Manual Screenshot

The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.