Categories
Motorcycles Diavel Ducati

2016 Ducati XDiavel Maintenance Schedule

Maintenance Schedule and Service Intervals for the 2016 Ducati XDiavel

The 2016 Ducati XDiavel maintenance schedule and service intervals — sourced from the owner’s manual.

Regular maintenance for the 2016 Ducati XDiavel

This is maintenance that you can do yourself (though the manual says you need a dealer to do it).

Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:

Check engine oil level
Check brake fluid level
Check tyre pressure and wear
Check final drive belt tension
Check brake pads. If necessary, contact your dealer to replace pads

2016 Ducati XDiavel Maintenance Schedule Table

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

This maintenance schedule is in the same format as in the manual, though altered to fit this screen.

The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.

km. x1000 115304560Time
mi. x1000 0.69182736(Months)
Reading of the error memory with DDS 2.0 and check of
software version update on control units
12
Check the presence of any technical updates and recall
campaigns
12
Change engine oil and filter12
Clean the engine oil mesh filter assembly
Check and/or adjust valve clearance
Change timing belts 60
Change spark plugs
Clean plugs with metal mesh filters on heads
Clean air filter 12
Change air filter
Check brake and clutch fluid level 12
Change brake and clutch fluid 36
Check brake disk and pad wear. Change if necessary12
Check the proper tightening of brake calliper bolts and
brake disk flange screws
12
Check front and rear wheel nuts tightening 12
Check frame-to-engine fasteners tightening
Check wheel hub bearings
Check and lubricate the rear wheel shaft
Check silentblocks on driven pulley
Check final drive driven and driving pulley nut tightening 12
Check final drive belt wear 12
Check final drive belt tension 12
Check steering bearings and lubricate, if necessary
Change front fork fluid
Visually check the front fork and rear shock absorber
seals
12
Check the freedom of movement and tightening of the
side and central stand (if any)
12
Visually check the fuel lines12
Check rubbing points, clearance, freedom of movement
and positioning of hoses and electric wiring in view
12
Lubricate the levers at the handlebar and pedal controls 12
Change coolant 48
Visually check the coolant level and sealing of the circuit 12
Check tyre pressure and wear 12
Check the battery charge level12
Check the operation of all electric safety devices (side
stand sensor, front and rear brake switches, engine kill
switch, gear/neutral sensor)
12
Check lighting, turn indicators, horn and controls 12
Reset the Service indication through the DDS 2.0
Final test and road test of the motorcycle, testing safety
devices (ex. ABS and DTC), Cruise Control device, electric
fans and idling
12
Softly clean the motorcycle12
Fill out that the service was performed in on-board documentation
(Service Booklet)
12

General Information on the 2016 Ducati XDiavel

The XDiavel features the latest in electronics, highlighted by the Bosch Inertial Measurement Unit (IMU). The XDiavel arrives with an eight-level Ducati Traction Control (DTC), three Riding Modes, Bosch Cornering ABS, Cruise Control, and the new Ducati Power Launch (DPL) for the perfect launch when dragging a fellow biker.

The Ducati XDiavel arrives with 50mm Marzocchi front forks, and a rear Sachs monoshock – all with adjustable preload and damping. Braking is handled by Brembo brakes (M4 32s on the XDiavel; M50s on the XDiavel S), and the bike rolls 17-inch wheels donning 120/70 ZR17 tires up front, and 240/45 ZR17s out back.

2016 Ducati XDiavel Owner’s Manual

2016 Ducati XDiavel Owner's Manual Screenshot

The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.