Categories
Sport Touring Motorcycles Yamaha

2016 Yamaha FJR1300ES Maintenance Schedule and Service Intervals

Maintenance schedule and service intervals for the 2016 Yamaha FJR1300ES

This is the maintenance schedule and associated service intervals for the 2016 Yamaha FJR1300ES.

The service internal are very similar of those 2016 Yamaha FJR1300A.

2016 Yamaha FJR1300ES Maintenance Schedule

Below is the maintenance schedule for the 2016 Yamaha FJR1300ES.

The maintenance for the 2016 Yamaha FJR1300ES is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

TIP:
• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No. Item Routine
x1000 mi0.648121620
x1000 km1713192531
month1612182430
1*Fuel line•Check fuel hoses for cracks or damage.
•Replace if necessary.
2*Spark plugs•Check condition.
•Adjust gap and clean.
Replace
3*Valve clearance•Check and adjust valve clearance when engine is coldEvery 26600 mi (42000 km)
4*Crankcase breather system•Check breather hose for cracks or damage.
•Replace if necessary.
5*Fuel injection•Adjust synchronization
6*Exhaust system•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.
8*Air induction system•Check the air cut-off valve, reed valve, and hose for damage
•Replace any damaged parts if necessary

General Maintenance and Lubrication Chart

No.ItemRoutine
x1000 mi0.648121620
x1000 km1713192531
month1612182430
1Air filter element•Clean with compressed air
•Replace if necessary
2*Clutch•Clean operation, fluid leakage
•Correect if necessary
3*Front brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
4*Rear brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
5*Brake hoses•Check for cracks or damage
•Check for correct routing and clamping
*•ReplaceEvery 4 years
6*Brake fluid•ChangeEvery 2 years
7*Wheels •Check runout and for damage
•Replace if necessary
8*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary
9*Wheel bearings•Check bearings for smooth operation
•Replace if necessary
10*Swingarm pivot bearings•Check bearing assembly for looseness
•Moderately repack with lithium-soap-based grease
11*Steering bearings•Check bearing assembly for looseness
*•Moderately repack with lithium-soap-based greaseEvery 16000 mi (25000 km)
12*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
13Brake lever pivot shaft•Apply silicone grease lightly
14Brake pedal pivot shaft•Apply lithium-soap-based grease lightly
15Clutch lever pivot shaft•Apply silicone grease lightly
16Shift pedal pivot shaft•Apply lithium-soap-based grease lightly
17*Centerstand and sidestand pivots•Check operation
•Apply lithium-soap-based grease lightly
18*Sidestand switch•Check operation and replace if necessary
19*Front fork•Check operation and for oil leakage.
•Replace if necessary.
20*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
21*Rear suspension link pivots•Apply lithium-soap-based grease lightly
22Engine oil•Change (warm engine before draining)
23*Engine oil filter cartridge• Replace.
24*Cooling system•Check hoses for cracks or damage
•Replace if necessary
*•Change coolant
25*Final gear oil•Check oil level for oil leakage
•Change
26*Front and rear brake switches•Check operation
27*Control cables•Apply Yamaha chain lubricant or other suitable cable lubricant thoroughly
28*Throttle grip •Check operation
•Check throttle cable free play and adjust if necessary.
•Lubricate cable and grip housing
•Lubricate grip warmer wire
29*Light, signals and switches•Check operation
•Adjust headlight beam

Note:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch systems
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2016 Yamaha FJR1300ES

The 2016 FJR1300ES features an all-new 6-speed transmission, lean angle sensitive cornering headlight system, plus electronically adjusted suspension. 1298cc, DOHC, 16-valve, liquid-cooled inline-four engine delivers serious power and torque for an unequalled spread of muscle over a wide RPM range. New 6-speed transmission for effortless cruising. Red line is a low 9,000 rpm for incredible reliability. Inside this compartment is a 12 volt 30 watt DC power outlet for added convenience. The 4-valve design optimizes breathing efficiency & overall engine performance, valve adjustment interval is 42,000 kms. With “Liner-less” ceramic composite plated cylinder bores. It’s “settable range” is from 50 to 160 km/hr & transmission must be in 3rd gear or higher.

Manual for the 2016 Yamaha FJR1300ES

2016 Yamaha FJR1300ES Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2016 Yamaha FJR1300ES.

You can download it from Yamaha’s website here.