The 2017-2018 Ducati XDiavel maintenance schedule and service intervals — sourced from the owner’s manual.
This applies to this model:
- 2017 Ducati XDiavel
- 2018 Ducati XDiavel
Regular maintenance for the 2017-2018 Ducati XDiavel
This is maintenance that you can do yourself (though the manual says you need a dealer to do it).
Using the motorcycle under extreme conditions, such as very damp and muddy roads or dusty and dry environment, could cause above-average wear of components like the drive system, the brakes or the air filter. If the air filter is dirty, the engine could get damaged. Therefore, this might translate in required service or replacement of the wear parts earlier than specified in the scheduled maintenance chart.
Every 1000 km/600 miles miles OR 6 months (whichever comes earlier, perform the following maintenance:
|Check engine oil level|
|Check brake fluid level|
|Check tyre pressure and wear|
|Check final drive belt tension|
|Check brake pads. If necessary, contact your dealer to replace pads|
2017-2018 Ducati XDiavel Maintenance Schedule Table
The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.
This maintenance schedule is in the same format as in the manual, though altered to fit this screen.
The distances and times are mentioned below. Whenever the first of either the time or distance interval is reached, the maintenance is required.
|Reading of the error memory with DDS 2.0 and check of
software version update on control units
|Check the presence of any technical updates and recall
|Change engine oil and filter||•||•||•||•||•||12|
|Clean the engine oil mesh filter assembly||•||–|
|Check and/or adjust valve clearance||•||•||–|
|Change timing belts||•||•||60|
|Change water pump belt||•||•||60|
|Change spark plugs||•||•||–|
|Clean plugs with metal mesh filters on heads||•||•||–|
|Clean air filter||•||•||12|
|Change air filter||•||•||–|
|Check brake and clutch fluid level||•||•||•||•||•||12|
|Change brake and clutch fluid||36|
|Check brake disk and pad wear. Change if necessary||•||•||•||•||•||12|
|Check the proper tightening of brake calliper bolts and
brake disk flange screws
|Check front and rear wheel nuts tightening||•||•||•||•||•||12|
|Check frame-to-engine fasteners tightening||•||•||•||•||–|
|Check wheel hub bearings||•||•||–|
|Check and lubricate the rear wheel shaft||•||•||–|
|Check silentblocks on driven pulley||•||•||–|
|Check final drive driven and driving pulley nut tightening||•||•||•||•||•||12|
|Check final drive wear (belt, driven and driving pulley).||•||•||•||•||12|
|Check final drive belt tension||•||•||•||•||•||12|
|Check steering bearings and lubricate, if necessary||•||•||–|
|Change front fork fluid||•||–|
|Visually check the front fork and rear shock absorber
|Check the freedom of movement and tightening of the
side and central stand (if any)
|Visually check the fuel lines||•||•||•||•||12|
|Check rubbing points, clearance, freedom of movement
and positioning of hoses and electric wiring in view
|Lubricate the levers at the handlebar and pedal controls||•||•||•||•||12|
|Visually check the coolant level and sealing of the circuit||•||•||•||•||•||12|
|Check tyre pressure and wear||•||•||•||•||•||12|
|Check the battery charge level||•||•||•||•||•||12|
|Check the operation of all electric safety devices (side
stand sensor, front and rear brake switches, engine kill
switch, gear/neutral sensor)
|Check lighting, turn indicators, horn and controls||•||•||•||•||•||12|
|Reset the Service indication through the DDS 2.0||•||•||•||•||•||–|
|Final test and road test of the motorcycle, testing safety
devices (ex. ABS and DTC), Cruise Control device, electric
fans and idling
|Softly clean the motorcycle||•||•||•||•||•||12|
|Fill out that the service was performed in on-board documentation
General Information on the 2017-2018 Ducati XDiavel
Stock seat height is right at the border between the two factions at 29.72-inches high. Capable of 40-degree lean angles in the corners. The single-side swingarm is a tubular Trellis construction as well with a removable forged steel section for extra rigidity. Rake and trail measure out at 30-degrees and 5.12-inches respectively Stock seat height is right at the border between the two factions at 29.72-inches high. Capable of 40-degree lean angles in the corners.
The single-side swingarm is a tubular Trellis construction as well with a removable forged steel section for extra rigidity. Brakes are top shelf with the Bosch Cornering ABS to manage the dual Brembo four-piston front calipers that bind a pair of 320 mm discs with a twin-pot caliper and 265 mm disc in back. A 106 mm bore and 67.9 mm stroke give us a 1,262 cc total displacement.
2017-2018 Ducati XDiavel Owner’s Manual
The above info was sourced from the owner’s manual. You can download it below. You can download it from the Ducati website here.