2017-2019 Yamaha FJR1300ES Maintenance Schedule and Service Intervals

This is the maintenance schedule and associated service intervals for the 2017-2019 Yamaha FJR1300ES.

2017-2019 Yamaha FJR1300ES Maintenance Schedule

Below is the maintenance schedule for the 2017-2019 Yamaha FJR1300ES.

The maintenance for the 2017-2019 Yamaha FJR1300ES is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

TIP:
• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.		Item	Routine
			x1000 mi	0.6	4	8	12	16	20
			x1000 km	1	7	13	19	25	31
			month	1	6	12	18	24	30
1	*	Fuel line	•Check fuel hoses for cracks or damage. •Replace if necessary.		•	•	•	•	•
2	*	Spark plugs	•Check condition. •Adjust gap and clean.		•		•		•
			Replace			•		•
3	*	Valve clearance	•Check and adjust valve clearance when engine is cold	Every 26600 mi (42000 km)
4	*	Crankcase breather system	•Check breather hose for cracks or damage. •Replace if necessary.		•	•	•	•	•
5	*	Fuel injection	•Adjust synchronization	•	•	•	•	•	•
6	*	Exhaust system	•Check for leakage •Tighten if necessary •Replace gasket(s) if necessary		•	•	•	•	•
7	*	Evaporative emission control system (for California only)	•Check control system for damage. •Replace if necessary.				•		•
8	*	Air induction system	•Check the air cut-off valve, reed valve, and hose for damage •Replace any damaged parts			•		•

General Maintenance and Lubrication Chart

No.		Item	Routine
			x1000 mi	0.6	4	8	12	16	20
			x1000 km	1	7	13	19	25	31
			month	1	6	12	18	24	30
1	*	Diagnostic system check	•Perform dynamic inspection using Yamaha diagnostic tool •Check the error codes	•	•	•	•	•	•
2		Air filter element	•Clean with compressed air •Replace if necessary		•	•	•	•	•
3	*	Clutch	•Clean operation, fluid level, and for fluid leakage •Correct if necessary	•	•	•	•	•	•
4	*	Front brake	•Check operation, fluid level, and for fluid leakage •Replace brake pads if necessary	•	•	•	•	•	•
5	*	Rear brake	•Check operation, fluid level, and for fluid leakage •Replace brake pads if necessary	•	•	•	•	•	•
6	*	Brake hoses	•Check for cracks or damage •Check for correct routing and clamping		•	•	•	•	•
	*		•Replace	Every 4 years
7	*	Brake fluid	•Change	Every 2 years
8	*	Wheels	•Check runout and for damage •Replace if necessary		•	•	•	•	•
9	*	Tires	•Check thread depth and for damage •Replace if necessary •Check air pressure •Correct if necessary		•	•	•	•	•
10	*	Wheel bearings	•Check bearings for smooth operation •Replace if necessary		•	•	•	•	•
11	*	Swingarm pivot bearings	•Check bearing assembly for looseness			•
	*		•Moderately repack with lithium-soap-based grease					•
12	*	Steering bearings	•Check bearing assembly for looseness	•	•	•	•	•	•
	*		•Moderately repack with lithium-soap-based grease	Every 16000 mi (25000 km)
13	*	Chassis fasteners	•Check all chassis fittings and fasteners •Correct if necessary		•	•	•	•	•
14		Brake lever pivot shaft	•Apply silicone grease lightly		•	•	•	•	•
15		Brake pedal pivot shaft	•Apply lithium-soap-based grease lightly		•	•	•	•	•
16		Clutch lever pivot shaft	•Apply silicone grease lightly		•	•	•	•	•
17		Shift pedal pivot shaft	•Apply lithium-soap-based grease lightly		•	•	•	•	•
18	*	Centerstand and sidestand pivots	•Check operation •Apply lithium-soap-based grease lightly		•	•	•	•	•
19	*	Sidestand switch	•Check operation and replace if necessary	•	•	•	•	•	•
20	*	Front fork	•Check operation and for oil leakage. •Replace if necessary.		•	•	•	•	•
21	*	Shock absorber assembly	•Check operation and for oil leakage. •Replace if necessary.		•	•	•	•	•
22	*	Rear suspension link pivots	•Apply lithium-soap-based grease lightly					•
23		Engine oil	•Change (warm engine before draining)	•	•	•	•	•	•
24	*	Engine oil filter cartridge	• Replace.	•		•		•
25	*	Cooling system	•Check hoses for cracks or damage •Replace if necessary		•	•	•	•	•
	*		•Change coolant					•
26	*	Final gear oil	•Check oil level for oil leakage			•
			•Change	•				•
27	*	Front and rear brake switches	•Check operation	•	•	•	•	•	•
28	*	Control cables	•Apply Yamaha chain lubricant or other suitable cable lubricant thoroughly	•	•	•	•	•	•
29	*	Throttle grip	•Check operation •Check throttle cable free play and adjust if necessary. •Lubricate cable and grip housing •Lubricate grip warmer wire		•	•	•	•	•
30	*	Light, signals and switches	•Check operation •Adjust headlight beam	•	•	•	•	•	•

TIP:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch systems
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2017-2019 Yamaha FJR1300ES

With electronically-adjustable suspension and upside-down forks, FJR1300AE offers a superior ride. A 1298cc, DOHC, 16-valve, liquid-cooled inline-four engine delivers serious power and torque for an unequalled spread of muscle over a wide rpm range. 6-speed transmission for effortless cruising. With 4-valve cylinder head design. YCC-T electronically controls throttle valves for outstanding throttle response & control. Closed loop Mikuni, 42mm, throttle body fuel injection system. With special “scissors-type” primary driven gear. A 4-into-1-into-2 stainless steel exhaust with new catalyzers. Curved radiator uses twin “ring-type” cooling fans.

Manual for the 2017-2019 Yamaha FJR1300ES

The above information was gleaned from the owner’s manual for the 2017-2019 Yamaha FJR1300ES.

You can download it from Yamaha’s website here.