Motorcycles | Sport Touring | Yamaha

2018-2019 Yamaha FJR1300A Maintenance Schedule and Service Intervals

2018-2019 Yamaha FJR1300A- Stock Image

This is the maintenance schedule and associated service intervals for the 2018-2019 Yamaha FJR1300A.

2018-2019 Yamaha FJR1300A Maintenance Schedule

Below is the maintenance schedule for the 2018-2019 Yamaha FJR1300A.

The maintenance for the 2018-2019 Yamaha FJR1300A is broken into two sections: periodic maintenance for emission control systems, and general maintenance and lubrication.

Periodic Maintenance Emission Control System

TIP:
• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.ItemRoutine
x1000 mi0.648121620
x1000 km1713192531
month1612182430
1*Fuel line•Check fuel hoses for cracks or damage.
•Replace if necessary.
2*Spark plugs•Check condition.
•Adjust gap and clean.
Replace
3*Valve clearance•Check and adjust valve clearance when engine is coldEvery 26600 mi (42000 km)
4*Crankcase breather system•Check breather hose for cracks or damage.
•Replace if necessary.
5*Fuel injection•Adjust synchronization
6*Exhaust system•Check for leakage
•Tighten if necessary
•Replace gasket(s) if necessary
7*Evaporative emission control system (for California only)•Check control system for damage.
•Replace if necessary.
8*Air induction system•Check the air cut-off valve, reed valve, and hose for damage
•Replace any damaged parts

General Maintenance and Lubrication Chart

No.ItemRoutine
x1000 mi0.648121620
x1000 km1713192531
month1612182430
1*Diagnostic system check•Perform dynamic inspection using Yamaha diagnostic tool
•Check the error codes
2Air filter element•Clean with compressed air
•Replace if necessary
3*Clutch•Clean operation, fluid level, and for fluid leakage
•Correct if necessary
4*Front brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
5*Rear brake•Check operation, fluid level, and for fluid leakage
•Replace brake pads if necessary
6*Brake hoses•Check for cracks or damage
•Check for correct routing and clamping
*•ReplaceEvery 4 years
7*Brake fluid•ChangeEvery 2 years
8*Wheels •Check runout and for damage
•Replace if necessary
9*Tires•Check thread depth and for damage
•Replace if necessary
•Check air pressure
•Correct if necessary
10*Wheel bearings•Check bearings for smooth operation
•Replace if necessary
11*Swingarm pivot bearings•Check bearing assembly for looseness
*•Moderately repack with lithium-soap-based grease
12*Steering bearings•Check bearing assembly for looseness
*•Moderately repack with lithium-soap-based greaseEvery 16000 mi (25000 km)
13*Chassis fasteners•Check all chassis fittings and fasteners
•Correct if necessary
14Brake lever pivot shaft•Apply silicone grease lightly
15Brake pedal pivot shaft•Apply lithium-soap-based grease lightly
16Clutch lever pivot shaft•Apply silicone grease lightly
17Shift pedal pivot shaft•Apply lithium-soap-based grease lightly
18*Centerstand and sidestand pivots•Check operation
•Apply lithium-soap-based grease lightly
19*Sidestand switch•Check operation and replace if necessary
20*Front fork•Check operation and for oil leakage.
•Replace if necessary.
21*Shock absorber assembly•Check operation and for oil leakage.
•Replace if necessary.
22*Rear suspension link pivots•Apply lithium-soap-based grease lightly
23Engine oil•Change (warm engine before draining)
24*Engine oil filter cartridge• Replace.
25*Cooling system•Check hoses for cracks or damage
•Replace if necessary
*•Change coolant
26*Final gear oil•Check oil level for oil leakage
•Change
27*Front and rear brake switches•Check operation
28*Control cables•Apply Yamaha chain lubricant or other suitable cable lubricant thoroughly
29*Throttle grip •Check operation
•Check throttle cable free play and adjust if necessary.
•Lubricate cable and grip housing
•Lubricate grip warmer wire
30*Light, signals and switches•Check operation
•Adjust headlight beam

Note:
● The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
● Hydraulic brake and clutch systems
• After disassembling the brake or clutch master cylinders, caliper cylinders or clutch release cylinder, always change the fluid. Regularly check the brake and clutch fluid levels and fill the reservoirs as required
• Replace the oil seals on the inner parts of the brake or clutch master cylinders, caliper cylinders and clutch release cylinder every two years.
• Replace the brake hoses every four years or if cracked or damaged.

About the 2018-2019 Yamaha FJR1300A

2018 Yamaha FJR1300A features 1298cc, DOHC, 16-valve (4/cyl), liquid-cooled inline-four engine that delivers serious power & torque. Engine meets or exceeds Europe’s EU-4 emission regulations 4-valve cylinder head design.Has a compact combustion chambers with 10.8 compression ratio, 30mm intake & 26mm exhaust valves and exhaust valves feature carburized tips for durability. Features a handy, two-stage (soft / hard) spring preload adjustment lever that allows the rider to switch between solo & two-up preload settings. With Lightweight cast-aluminum 3-spoke wheels. With rim of MT3.50×17 (120/70ZR17) & MT5.50×17 (180/55ZR17). Small item storage compartment (in fairing) with 12V / 30W DC power outlet.

Manual for the 2018-2019 Yamaha FJR1300A

2018-2019 Yamaha FJR1300A Maintenance schedule screenshot from manual

The above information was gleaned from the owner’s manual for the 2018-2019 Yamaha FJR1300A.

You can download it from Yamaha’s website here.

Similar Posts