| |

BMW R nineT Pure (2017-2020) Maintenance Schedule

2021 BMW R nineT Pure Option 719 Cosmic blue metallic and lightwhite

This is the complete maintenance schedule for the BMW R nineT Pure, made from 2017-2020, before gaining throttle-by-wire in 2021.

You may be searching for one of the following maintenance schedules from the BMW R nineT family:

Model family2014-20162017-20202021+
R nineT (Classic)2014-2016 BMW R nineT maintenance schedule2017-2020 BMW R nineT maintenance schedule2021+ BMW R nineT maintenance schedule
R nineT Puren/a2017-2020 BMW R nineT Pure maintenance schedule2021+ BMW R nineT Pure maintenance schedule
R nineT Urban G/S & Scramblern/a2017-2020 BMW R nineT Urban G/S and Scrambler maintenance schedule2021 BMW R nineT Urban G/S & Scrambler maintenance schedule
R nineT Racern/aWIPn/a
BMW R nineT maintenance schedules

The maintenance schedule for the R NineT Pure is very similar to that of the “Classic” R NineT. But there are a few small differences in specs and parts.

What the whole R nineT line has in common is the engine base — an air-cooled 1,170cc flat twin “boxer” engine with four valves per cylinder and double overhead camshafts, pushing about 81 kW (110 hp) of power and 119 Nm (88 lb-ft) of torque to the rear wheel through a dry clutch and a shaft drive.

It’s the same “camhead” engine that was used in the previous R 1200 generation of motorcycles, by the way, including the contemporaneous R 1200 R and 2010-2012 R 1200 GS. But those motorcycles evolved to add water cooling and generally have been higher-spec bikes than the air-cooled R nineT.

In 2021, the BMW R nineT range was updated to throttle by wire, and the maintenance schedule changed slightly.

This site has links for things like oil and spark plugs from which we earn a commission (which unfortunately nobody can save, not even us). If you appreciate this work, then please use those links. Thanks!

What you need to service the BMW R nineT Pure — Consumables and Special Tools

For the BMW R nineT Pure, the manual recommends the following specific consumables.

PartBMW R nineT Pure Spec
Engine oilPer the manual for all R nineT bikes, a maximum of 3.8 L (1 US gal) L of SAE 15W-50, API SJ/JASO MA2. Additives (for instance, molybdenum-based substances) are prohibited, because they would attack the coatings on engine components, BMW Motorrad recommends BMW Motorrad ADVANTEC Ultimate oil.
Oil filterAll BMW R bikes use a BMW/Mahle oil filter, part number 11 42 7 673 541. The best replacement is a Hiflofiltro HF164.
Spark plugsNGK MAR8B-JDS This is what the manual suggests. Make sure it’s gapped correctly to 0.8mm (get a gapping tool).
Air filterYou can get the stock air filter (part 13717706414), but riders love the BM-1204 air filter from K&N, which is reusable.
Brake padsUse the standard brake pads by Brembo, which you can order from your dealer. Or use EBC double hardened brake pads to get the best out of your advanced braking system. Use two FA244HH for the front, and one FA363HH for the rear.
* Note — Pads are different across the R nineT line (R nineT Classic vs Pure, Racer, Scrambler, and Urban GS) — get the right ones.
Drive oilCalled the “Rear axle differential oil” in the manual. BMW recommends “SAE 70W-80 / hypoid axle G3”, but many hypoid gear oils work, e.g. Mobil 1 75W-90.
Alternator beltSuper annoying when this breaks! The part number is 11 31 8 528 385. It’s easiest to pick this up from a dealer.
BMW R nineT Pure consumables

BMW R nineT Pure Maintenance Schedule

Below is the maintenance schedule for the BMW R nineT Pure as per the manual, but made more clear so that you can understand what needs to happen more easily.

The R nineT range, being air-cooled, have surprisingly short maintenance intervals — quite similar to other air-cooled performance bikes. You have to service the valves every 6,000 miles or 10,000 kilometres.

The good news is that you can get to the valve heads very easily, as the cylinders are sticking out into the wind.

The Pure also doesn’t need you to change fork oil, as the forks are simpler than on the R nineT.

Simplified, the maintenance for the BMW R nineT Pure involves:

  • A standard service every 12 months (irrespective of distance)
  • Oil change every 10,000 kms or 12 months, whichever is earlier,
  • Checking the valve clearances every 10,000 km/6,000 miles (with no time restriction)
  • Adjust engine synchro every 10,000 km / 6,000 miles
  • A series of other periodic checks

Previous manuals used to require adjusting synchro every 10,000 km, but this has been omitted from recent manuals.

x 1000 km102030405060708090100
x 1000 mi6121824303642485460Every
Standard scope of BMW serviceYear
Engine oil change, with filter (BMW Motorrad ADVANTEC Ultimate oil, BMW/Mahle oil filter, part number 11 42 7 721 779)XXXXXXXXXXYear (a)
Oil change in the rear bevel gearsXXXXX2 years (b)
Check valve clearanceXXXXXXXXXX
Change transmission oil (Mobil 1 75W-90)XXYear (c)
Replace spark plugs (NGK MAR8B-JDS)XXXXX
Replace air cleaner insert (BM-1204)XXXXX
Replace alternator belt (11 31 8 528 385)X(d)X(d)
Adjust engine synchronizationXXXXXXXXXX
Change brake fluid in entire system (b) (Castrol Dot 4)Year/ 2. years (e)
BMW R nineT Pure maintenance schedule

Notes

  • (a) Annually or every 10,000 km/ 6,000 miles (whichever comes first)
  • (b) Anually or every 20,000 km/ 12,000 miles (whichever comes first)
  • (c) for the first time after one year, then every two years or 40,000 km/24,000 miles (whichever comes first)
  • (d) every six years or every 40,000 km/24,000 miles (whichever comes first)
  • (e) for the first time after one year, then every two years

BMW Motorrad Service, standard scope

The activities in the BMW Motorrad Service standard scope (that are to be done periodically according to the service schedule above) are listed below.

There might be additional work to be done on your BMW R nineT Pure in addition to the standard service — whatever you (or the mechanic) observe.

Note: Some of the below tests, including those that need the BMW Motorrad diagnostic system or re-setting the service due date, require BMW-specific equipment. These are marked with a [B].

[B] Perform vehicle test with BMW Motorrad diagnosis system
Visually inspect the clutch system (adjust free play and lubricate as necessary)
Check steering-head bearing
Visually inspect the brake lines, brake hoses and connections
Check front brake pads and brake discs for wear (replace pads with FA244HH if necessary)
Check front wheel brake fluid level
Check rear brake pads and brake disc for wear (replace pads with FA363HH if necessary)
Check rear wheel brake fluid level
Check the cable linkages for ease of movement, chafing and kinks, and play (lubricate with Protect All Cable Life as necessary)
Check tyre pressures and tread depth
Check side stand for ease of movement
Check tension of the spokes and tighten as needed
Check the lighting and signal equipment
Functional check for engine start suppression
Final inspection and road safety check
[B] Set the service-due date and service countdown distance (using the BMW Motorrad diagnostic system)
Check battery charging state
[B] Confirm BMW service in the vehicle literature
BMW Motorrad service for R nineT Pure — Standard scope

BMW R nineT Pure Tire size and pressures

The following are tire sizes and tyre pressures for the BMW R nineT Pure.

BMW recommends these tyre pressures for most of their standard bikes and sport bikes. Stock, the wheels are cast wheels, though you can opt for spoked wheels.

Wheel/TireSizePressure (cold)
Front120/70 ZR 172.5 bar (36 psi)
Rear180/55 ZR 172.7 bar (39 psi) one-up
2.9 bar (42 psi) two up with cargo
BMW R nineT Pure tyre size and pressure

About the BMW R nineT Pure

2017 2018 BMW R nineT Pure on road riding position

The BMW R nineT is an already legendary motorcycle from BMW, representing “simplicity”, but doing so in a typically classy BMW fashion. The name R nineT is meant to pay homage to BMW’s 90 years in the business, not to any one specific model.

All motorcycles in the range (including the BMW R nineT Pure) are powered by the final air-cooled version of the opposite-twin Boxer engine, which in dual overhead cam form from 2017-2020 produced a claimed 85 kW (110 hp) and 116 Nm (88 lb-ft) of torque.

In contrast with earlier BMW roadsters, BMW finally ditched the telelever front suspension for a traditional fork. The original R nineT Pure (2017-2020) fork is a non-adjustable conventional fork, in contrast with the sporty setup on the 2017-2020 BMW R nineT (classic).

The R nineT Pure also comes classic with cast alloy rims and tubeless tyres.

There is, of course, a wide range of accessories and options for the R nineT. These have really filled out over the years. You can pour a lot of money into a BMW motorcycle!

In 2021, the R nineT Pure was updated to include a 6-axis IMU, ride by wire, and a host of rider aids including cornering ABS, and even optional cruise control.

The maintenance schedule changed slightly with the ride-by-wire update so is kept separate.

Manual for the BMW 2017-2020 R nineT Pure

Below is a screenshot of the maintenance schedule from which the above was derived (there’s more information in the manual about what the numbers mean) for the BMW R nineT Pure.

2019 BMW R nineT Pure maintenance schedule screenshot
Screenshot from 2019 BMW R nineT Pure manual

The above information was gleaned from the owner’s manual for the 2019 BMW R nineT Pure. You can download it from BMW’s website directly here.

Similar Posts