|

Kawasaki Concours GTR1000 First Gen (1986-2006) Maintenance Schedule

Kawasaki Concours GTR1000 cover image

This is the maintenance schedule with associated service intervals for the first generation Kawasaki Concours, also known as the Kawasaki GTR1000 or ZG 1000 in different markets, manufactured between 1986 and 2006, with only minor changes in between.

You might also be looking for the maintenance schedule for the Kawasaki Concours 14 or 1400GTR or GTR1400.

This is the original Concours, with a 997cc L4 liquid-cooled carburetor-fed engine. It’s a sport touring model that is more oriented towards touring with its comfortable seating and huge road presence.

(These are all the same bike — slight variations on power, depending on market — but mostly the same, with different names!)

This site has links for things like oil and spark plugs from which we earn a commission (which unfortunately nobody can save, not even us). If you appreciate this work, then please use those links. Thanks!

What you need for regular maintenance for the Kawasaki Concours GTR1000

The following is a list of tools and consumables that are recommended for the Kawasaki Concours GTR1000.

  • Engine Oil — The manual specifies API SE, SF, or SG; or API SH or SJ with JASO MA, with viscosity 10W-40. Kawasaki 10W-40 engine oil works well.
  • Oil filter — Available from your local dealer, or you can use the Hiflofiltro HF401, which is usually around $10. If you have a standard filter, don’t forget an oil filter wrench (Hiflofiltro ones don’t need them).
  • Coolant — Kawasaki motorcycles ship with 50/50 ethylene glycol-based antifreeze. So any 50/50 ethylene glycol antifreeze pre-mix would work. The manual says to “Dilute a permanent type of antifreeze” to keep anti-corrosion properties. Valvolene Zerex G05 meets these requirements
  • Spark plug — Use an NGK Iridium DR9EIX for better starting, response, fuel consumption, etc.
  • Air filter — Use a K&N KA-9084 as a drop-in replacement.
  • Clutch cable lubricantProtect All Cable Life is a good generic clutch cable lubricant.
  • Brake fluid — Manual specifies Dot 4. Castrol Dot 4 synthetic is inexpensive and great quality.
  • Grease — A lithium soap-based grease is good for lubricating major components like your side stand, centre stand, and major bearings.

Maintenance Schedule for Kawasaki Concours GTR1000

The following is the list of maintenance operations and to be done on this motorcycle with a time or distance interval — whichever comes earlier.

Notes:

  • K: Should be serviced by an authorized Kawasaki dealer (but I find that unlikely…)
  • *: For higher odometer readings, repeat the frequency interval established here.
  • †: Replace, add, adjust, or torque if necessary
  • (C): California model only
OperationEvery800 km (500 mi)5,000 km (3,000 mi)10,000 km (6,000 mi)15,000 km (12,000 mi)20,000 km (12,000 mi)25,000 km (15,000 mi)30,000 km (18,000 mi)
Carburetor synchronization – check †
Idle speed – check
Throttle grip play – check †
Spark plug – clean and gap † (replace with DR9EIX)
Valve clearance – check †
Air suction valve – check †
Air cleaner element – clean
Air cleaner element – replace (KA-9084)Every 5 cleanings
Fuel system – check †
Evaporative emission control system (C) – check †
Battery electrolyte level – check †month
KBrake light switch – check †
Brake pad wear – check †
KBrake clutch/hoses, connections – check †
KFuel hose, connections – check †
Brake/clutch fluid level – check †month
KBrake/clutch fluid – change2 years
KSteering – check †
Final gear case oil level – check †
Final gear case oil – change
KPropeller shaft joint – lubricate
Nut, bolt, and fastener tightness – check †
Tire wear – check †
Engine oil – changeyear
Oil filter – replace (HF401)
General lubrication – perform
KFront fork oil – change
KSwingarm pivot, unit-trak linkage – lubricate
Coolant – change2 years
Radiator hoses, connections – check †year
KSteering stem bearing – lubricate2 years
KBrake/clutch master cylinder cup and dust seal – replace2 years
KCaliper piston seal and dust seal – replace2 years
KCaliper slave cylinder piston seal – replace2 years
KBrake/clutch hose and pipe – replace4 years
KFuel hose – replace4 years
Kawasaki Concours GTR1000 service schedule

Tyre size and tyre pressure for the Kawasaki Concours GTR1000

The Kawasaki Concours GTR 1000 has the following tyres and tyre sizes standard:

  • Front: 120/70R18 M/C 59V Dunlop K701F Tubeless
  • Rear: 150/80R16 M/C 71V Dunlop K700J Tubeless

The manual for the Kawasaki Concours GTR1000 recommends the following tyre pressures (when cold):

  • Front: 250 kPa (36 psi)
  • Rear: 290 kPa (42 psi)

General information about the Kawasaki Concours GTR1000

The Kawasaki Concours GTR1000, known in Europe as the 1000GTR and in USA as the ZG1000, is a 997 cc, six-speed, four-cylinder, liquid-cooled sport touring motorcycle with a shaft drive.

With its full fairing, tall screen, twin panniers, and 28 litre (7.4 US gal) tank, it’s well-suited to going across the country two-up.

Kawasaki introduced the Concours in 1986, based on earlier Ninja models, but tuned to be less aggressive.

The Concours was introduced into the USA the year after BMW K100LT, but at less than two thirds of the BMW’s price. Many reviewers heaped praise on the Kawasaki, and called it superior to the BMW.

The Concours was largely unchanged in two decades. In 1994 the instrument clustor was updated, and afterwards only minor changes happened on the outside – fork protectors and exhaust tips.

As the Concours first-generation endured with few revisions, experienced mechanics and used parts are readily available.

Manual for the Kawasaki Concours GTR1000

Kawasaki Concours GTR1000 Maintenance schedule screenshot

The above maintenance schedule comes directly from the user’s manual for the Kawasaki Concours/GTR1000, which is available on the Kawasaki web site.

Similar Posts