This is the maintenance schedule with associated service intervals for the Kawasaki Ninja 250R EX250-F, also known as the Kawasaki EX250 in different markets, or the ZZR250. It was made from 1988 until 2007 basically unchanged until Kawasaki replaced it with the 2008 Kawasaki Ninja 250R, improving the aesthetics and also a bunch of riding components like brakes, suspension, lights, and so on.
The Kawasaki Ninja 250R was originally introduced in 1986. It has always been the entry-level sportbike, with a riding posture that’s not totally upright (like a Bonneville or equivalent), but also not totally bento ver the bars, like on a ZX-6R. It’s a commuter that’s agile, or a casual sportbike that will sip fuel and let you go down to the shops.
The Ninja 250R is special in that unlike nearly any larger motorcycle, you can redline it in every gear (well, until you run out of power). You can really thrash it and enjoy it to the full, flinging it around corners with aplomb. So the Ninja 250R is a great beginner bike because it’s so forgiving.
This site has links to Amazon for things like oil and spark plugs from which we earn a commission (which unfortunately nobody can save, not even us). If you appreciate this work, then please use those links to buy your oil, spark plugs, etc.
Maintenance Schedule for Kawasaki Ninja 250R EX250-F
Below is the maintenance schedule for the Kawasaki Ninja 250R EX250-F.
The following is the list of maintenance operations and to be done on this motorcycle with a time or distance interval — whichever comes earlier.
The maintenance for the Kawasaki Ninja 250R EX250-F is broken into two sections: Emission Related and Non-Emissions.
- For higher odometer readings, repeat at the frequency interval established here
- K: Should be serviced by an authorized Kawasaki dealer
- †: Replace. add. adjust, or torque if necessary.
- (c): California model only
- #: Service more frequently when operation in severe conditions: dusty, wet, muddy, high speed, or frequent starting/stopping
|Operation||Every||800 km (500 mi)||5000 km (3000 mi)||10000 km (6000 mi)||15000 km (9000 mi)||20000 km (12000 mi)||25000 km (15000 mi)||30000 km (18000 mi)|
|Carburetor synchronization — check †||•||•||•||•||•||•||•|
|Idle speed — check †||•||•||•||•||•||•||•|
|Throttle grip play —check †||•||•||•||•|
|Spark plug — clean and gap †||•||•||•||•||•||•|
|Valve clearance — check †||•||•||•||•|
|Air cleaner element — clean||•||•||•||•|
|Air cleaner element — replace||5 cleanings||•|
|Fuel system — check||•||•||•|
|Evaporative emission control system (c) — check †||•||•||•||•||•||•||•|
|Brake light switch — check †||•||•||•||•||•||•||•|
|Brake pad wear — check †||•||•||•||•||•||•|
|K||Brake hose connection — check †||•||•||•||•||•||•|
|K||Fuel hose connection — check †||•||•||•||•||•||•|
|Brake fluid level — check †||month||•||•||•||•||•||•||•|
|K||Brake fluid — change (DOT 4 only)||2 years||•|
|Clutch — adjust||•||•||•||•||•||•||•|
|K||Steering –check †||•||•||•||•||•||•||•|
|Drive chain wear — check † #||•||•||•||•||•||•|
|Nuts, bolts, and fasteners tightness — check †||•||•||•||•|
|Tire wear — check †||•||•||•||•||•||•|
|Engine oil — change (10W-40, e.g. Motul 5100)||year||•||•||•||•|
|Oil filter — replace||•||•||•||•|
|General Lubrication — perform||•||•||•||•||•||•|
|K||Front fork oil — change||•|
|K||Swingarm pivot, uni-trak linkage — lubricate||•||•||•|
|Coolant — change (ethylene glycol-based coolant)||2 years||•|
|Radiator hoses, connections–check †||year||•||•||•||•|
|K||Steering stem bearing — lubricate (lithium soap-based grease)||2 years||•|
|K||Master cylinder cup and dust seal — replace||2 years|
|K||Caliper piston seal and dust seal — replace||2 years|
|K||Brake hose — replace||4 years|
|K||Fuel hose — replace||4 years|
|Drive chain–lubricate # (Motul chain paste)||Every 600 km (400 mi)|
|Dive chain slack — check † #||Every 1000 km (600 mi)|
Tyre size and tyre pressure for the Kawasaki Ninja 250R EX250-F
The Kawasaki Ninja 250R EX250-F has the following tyres and tyre sizes standard:
- Front: 100-80-16M/C 50S DUNLOP K630F Tubeless
- Rear: 130/80-16 64M/C DUNLOP K630 Tubeless
The manual for the Kawasaki Ninja 250R recommends the following tyre pressures (when cold):
- Front: 200 kPa/28 psi
- Rear: 225 kPa/32 psi
General information about the Kawasaki Ninja 250R EX250-F
The Kawasaki Ninja 250R has a twin-cylinder 248cc engine that makes modest power, making it ideal for entry-level riders everywhere — whether it’s legally mandated or just a “good idea to start with a 250”.
Its compact parallel-twin design is lightweight and high revving, with a broad torque curve. It has decent mass centralization for easy handling by novices, with a rame that’s lightweight and rigid.
While not being a full-on sportbike like the ZX-6R from Kawasaki, the Ninja 250R has good cornering clearance and a low centre of gravity, making it fun to fling around back roads at high RPMs and lean angles.
The Ninja 250R’s engine is a high-revving, liquid-cooled, parallel twin engine with dual overhead cams and four valves per cylinder.
Its 13,000 rpm redline and six-speed transmission means that even experienced riders can get a lot of joy out of the little Ninja. Keeping the revs soaring is rewarding, with a jet turbine-like sound that is hard to eke out of a larger motorcycle on public roads (within the speed limit, anyway).
And on top of all that, the Ninja’s 250cc engine has excellent fuel economy even in this early carburettor configuration. Don’t be surprised if you easily clear 70 mpg (US gallons), even while riding it aggressively.
Like its larger siblings from Kawasaki, the Ninja 250R has an aerodynamic full fairing, Kawasaki’s progressive rear suspension and high-performance disc brakes.
It also has a low seat height for added confidence when stopped. Other features include an easy-to-read instrument panel, positive neutral finder, centerstand, and pop-up bungee hooks.
Manual for the Kawasaki Ninja 250R EX250-F
The above maintenance schedule comes directly from the user’s manual for the Kawasaki Ninja 250R (2004-2007 for this one), which is available here.