Categories
Triumph Roadsters

Triumph Street Triple S Maintenance Schedule

Maintenance schedule and service interval for the Triumph Street Triple S

This is the maintenance schedule with associated service intervals for the Triumph Street Triple S motorcycles.

It’s very similar to those for other motorcycles with similar engines in the Triumph Street Triple Series.

This maintenance schedule applies to the following model:

  • 2020 Triumph Street Triple S

Maintenance Schedule for Triumph Street Triple S

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

There are two kinds of service interval: every a) distance or b) time period. In each case, it’s the earlier of the two that’s most important.

Part of the below table includes checks you should do every day.

Operation DescriptionEvery
1000
6 month
Year10,000 and 30,00020,00040,000
Lubrication
Engine oil – replace
Engine oil filter – replace
Engine and oil cooler – check for leaksDay
Fuel System and Engine Management
Fuel system – check for leaks, chafing etc.Day
Throttle body plate (butterfly) – check/clean
Autoscan – carry out a full Autoscan using the
Triumph diagnostic tool (print a customer copy)
ABS modulator – check for stored DTCs
Secondary air injection system – check/clean
Air cleaner – replace
Throttle bodies – balance
Fuel hoses – replaceEvery four years, regardless of mileage
Evaporative loss hoses – replaceEvery four years, regardless of mileage
Ignition system
Spark plugs – check
Spark plugs – replace
Cooling system
Cooling system – check for leaks Day
Coolant level – check/adjust Day
Coolant – replaceEvery three years, regardless of mileage
Engine
Clutch cable – check/adjustDay
Valve clearances – check/adjust
Camshaft timing – adjustFirst 12,000 miles (20,000 km) service only
Wheels and Tires
Wheels – inspect for damageDay
Wheel bearings – check for wear/smooth operation
Tire wear/tire damage – check Day
Tire pressures – check/adjustDay
Electrical
Lights, instruments and electrical systems – checkDay
Steering and Suspension
Steering – check for free operationDay
Forks – check for leaks/smooth operationDay
Fork oil – replace
Steering head bearings – check/adjust
Steering head bearings – lubricate
Rear suspension linkage – check/lubricate
Brakes
Brake pads – check wear levelsDay
Brake master cylinders – check for fluid leaks Day
Brake calipers – check for fluid leaks and seized pistons Day
Brake fluid levels – checkDay
Brake fluid – replaceEvery two years, regardless of mileage
Final Drive
Drive chain slack – check/adjust Day
Drive chain – wear check Every 500 miles (800 km)
Drive chain – lubricateEvery 200 miles (300 km)
Drive chain rubbing strip – check Day
General
Fasteners – inspect visually for securityDay
Bank angle indicators – inspect visually for wear Day
Side stand – check operationDay

General information about the Triumph Street Triple S

The engine is a 660cc in-line triple capable in A2-license version to 47.6 hp at 9,000 rpm and 60 Nm of at 5,250 rpm. Reaching the A license conditions you can reset the power and torque to 95.2 hp at 11,250 rpm and 66 Nm of torque at 9,250rpm. The engine is Euro 5 homologated and Triumph took care of the exhaust updating the unit to deliver a deep in-line triple roar with induction sound on acceleration. The suspension is provided by Showa, 41 mm upside-down forks for 110 mm of travel and for the rear we can find a piggyback reservoir monoshock with 124 mm of travel and adjustable preload.

Manual for the Triumph Street Triple S

Triumph Street Triple S Maintenance Schedule Screenshot From Manual

The above maintenance schedule comes directly from the user’s manual for the Triumph Street Triple S, which is available on the Triumph website.