Triumph | Adventure and Touring

Triumph Tiger XCa Maintenance Schedule

This is the maintenance schedule with associated service intervals for the Triumph Tiger XCa motorcycles.

It’s very similar to those for other motorcycles with similar engines in the Triumph Tiger 800 series.

This maintenance schedule applies to the following models:

  • 2018 Triumph Tiger XCa
  • 2019 Triumph Tiger XCa

Maintenance Schedule for Triumph Tiger XCa

The following is the list of maintenance operations and to be done on this motorcycle with a distance or time interval — whichever comes earlier.

There are two kinds of service interval: every a) distance or b) time period. In each case, it’s the earlier of the two that’s most important.

Part of the below table includes checks you should do every day.

Operation DescriptionEvery500
(800)
one month
Year6,000 and 18,000
(10,000 and 30,000)
12,000 (20,000)24,000(40,000)
Fork oil – renew
Headstock bearings – check/adjust
Headstock bearings – lubricate
Rear suspension linkage – check/lubricate
Brakes
Brake pads – check wear levels Day
Brake master cylinders – check for fluid leaks Day
Brake calipers – check for fluid leaks and seized pistonsDay
Brake fluid levels – checkDay
Brake fluid – renewEvery two years, regardless of mileage
Drive Chain
Drive chain slack – check/adjust Day
Drive chain – wear checkEvery 500 miles (800 km)
Drive chain – lubricate Every 200 miles (300 km)
Drive chain rubbing strip – checkDay
Drive chain rubbing strip – renew
General
Fasteners – inspect visually for security Day
Bank angle indicators – inspect visually for wear Day
Accessory rack sliding carriage – check for correct operation‡
Side stand – check operation Day
Centre stand – check operation Day
Centre stand flanged sleeves – check/clean/grease
Accessory pannier link mechanism – check for correct operation and adjustment‡

* Evaporative system fitted to models for certain markets only.

‡ Only if fitted.

General information about the Triumph Tiger XCa

The distinctive style of the Tiger XCa is in full effect, and it starts out with its rather unique front end. New for this generation are dual premium Brembo calipers up front that bite 305 mm discs with a 255 mm disc and single-piston Nissin anchor out back. Both ends benefit from switchable ABS. In addition to the laced wheels that are preferred by off-road riders, the suspension is geared toward rough terrain with 8.66 inches of travel in the 43 mm, usd front forks and 8.46 inches of travel from the WP monoshock that tames the rear wheel. This mass-optimized triple is built to spool up even faster than its predecessor with a total of 95 ponies and 58 pounds o’ grunt on tap that max out at 9,500 rpm and 8,050 rpm, respectively.

Manual for the Triumph Tiger XCa

Triumph Tiger XCa Maintenance Schedule Screenshot From Manual

The above maintenance schedule comes directly from the user’s manual for the Triumph Tiger 800, which is available on the Triumph web site.

Similar Posts